Controlling The Camera From Your Computer - Epson PC3000Z User Manual

When your camera is not connected to the computer, this
menu is not accessible. Make sure your camera is
properly connected to the computer, following the
instructions on page 2-22.
Controlling the camera from your
computer
The Control Options box contains a display panel and
settings that correspond to the control buttons on the top
of your camera. You can change camera settings by using
the controls in this box, just as you would use the control
buttons on the top of the camera. When the camera is
connected to the computer, the only control you can use
on the camera itself is the power switch.
The display panel on the computer and the display panel
on the camera are updated whenever the image quality
setting, flash mode, or picture count changes.
Selecting the image quality setting
Use the arrow in the Mode box to select an image control
setting:
PhotoPC 600
Standard 640
Fine 1024
Super Fine 1024
Monochrome 1024
Fine
Monochrome 1024
Super Fine
You can switch freely between these settings and mix
pictures of varying image quality in the camera. Keep in
mind that the camera's picture capacity will vary
accordingly. See your camera's User's Guide for more
information on the image quality settings.
Using EPSON Photo!2
PhotoPC 700
480 pixels 640 480 pixels
768 pixels 1280 960 pixels
768 pixels 1280 960 pixels
768 pixels 1280 960 pixels
768 pixels 1280 960 pixels
2-19
2