Packing List; Variable Speed Switch; Assembly - Craftsman 315.262520 Operator's Manual

UNPACKING
Thisproducthasbeen shipped completely a ssembled.
• Carefully r emove thetoolandanyaccessories fromthe
box.Makesurethatallitemslistedinthepacking list
areincluded.
• Inspect t hetoolcarefully t o makesurenobreakage o r
damage occurred duringshipping.
• Donotdiscard thepacking material u ntil y ouhave
carefully inspected andsatisfactorily o perated thetool.
• If anypartsaredamaged or missing, p lease call
1-800-932-3188 forassistance.
PACKINGLIST
Center H andle Drill
HexKey
Carrying Case
Operator's M anual
_i WARNING: If any parts are missing do not operate
this tool until the missing parts are replaced. Failure
to do so could result in possible serious personal
injury.
A
WARNING: Do not attempt to modify this tool
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
_, WARNING: Do not connect to power supply until
assembly is complete. Failure to comply could result
in accidental starting and possible serious injury.
_, WARNING: Do not allow familiarity with tools
to make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious
injury.
_, WARNING: Always wear safety goggles or safety
glasses with side shields when operating power
tools. Failure to do so could result in objects being
thrown into your eyes resulting in possible serious
injury.
APPLICATIONS
You may use this tool for the purposes listed below:
• Drilling in wood
• Drilling in ceramics, plastics, fiberglass, and laminates
• Drilling in metals
• Mixing paint
VARIABLE SPEED SWITCH
See Figure 2.
To turn the drill ON, depress the variable speed switch.
Release switch trigger to turn the drill OFF.
NOTE: You might hear a whistling or ringing noise from
the switch during use. Do not be concerned; this is a
normal part of the switch function.
VARIABLE
SPEED
SWITCH
Fig. 2
10