OVERVIEW
......
,,
The Remote Light Control module offers a quick and convenient way
to control the lights in your home. The module can be programmed to
a remote control, a garage door opener, or an AssureLink
TM
Internet
Gateway. The module is compatible with up to 8 AssureLink
TM
remote
controls AND a combination of up to 8 AssureLink
TM
enabled garage
Learn
Button
door openers or AssureLink
TM
Internet GatewayAccessories. This
product is NOTto be used for appliances. Not for use with 3-way or
4-way switch combinations.
SPECiFiCATiONS
Fluorescent ......................................................................... 600W / 5A
Tungsten............................................................................. 600W / 5A
LED
LED..................................................................................... 600W / 5A
Electronic Ballast (Fluorescent) ................................... 599W / 4.99A
Re-lamp with listed SBCFLonly, 599W total, maximum
Power Button
Lamp
Outlet
REMOTE LIGHTCONTROL
Model 139.21255
To prevent possible SERIOUS INJURYor
DEATHfrom electrocution or fire, the light
control is ONLYfor indoor use.
NOTICE: T o comply with FCC and/or Industry Canada(IC) rules.
adjustment or modifications of this transceiver are prohibited.
THERE
ARE
NO
USER
SERVICEABLE
PARTS.
This device complies with Part 15 of the FCCrules and ICRSS-
210. Operation is subject to the following two conditions: (1)
this device may not cause harmful iuterference, and (2) this
device must accept airy iuterference received, includiug
interferencethat may cause undesired operation.
MODES OF OPEP_TION
...........
,,,
The module can be programmed to a AssureLink
TM
remote control, a AssureLink
TM
enabled garage door opener, or an
AssureLink
TM
Internet GatewayAccessory.
REMOTE CONTROL OPERATION:
Allowsyouto activate the
modulefrom a remote
control.
GARAGE DOOR OPENER OPERATION:
Allowsyouto synchronize
the modulewith your garage
door openerlightbulbs.
Example:Thegaragedoor
opener fight bulbsare set to
automatically turn off after4 _ minutes,the
modulewill alsoturn off after4 _ minutes.
ASSURELINK
TM
GATEWAY
OPERATION:
Allowsyouto activate the
modulefrom a webbrowser
or smartphone(requires
theAssureLink
TM
InternetGateway).
Plug the lamp into the module and plug
the module into an electrical outlet (the
LED on the module will flash). NOTE:
Make sure the lamp is switched ON.
lf the lamp is not ON, press and release
the Power button on the module to turn
the lamp ON.
iNSTALLATION& PROGRAMMIH6
Press and releasethe Learn button on
the module (the LED on the module
will light).
Press the button on OR
the remotecontrol.
Pressthe Learnbuttonon OR
thegaragedoor opener.
Visit www.craftsman.com/
assurelink. Go to "Manage
Devices", then "Learn Device"
to program the AssureLink
TM
Internet GatewayAccessory.
The lamp's light bulb will blink and the
LEDon the module will turn OFFwhen the
device has been programmed.
TO ERASE ALLPROGRAMIViIN6
Press and hold the Learn button on the module for 6 seconds. All programming is now erased.