Display Modes; Setting Up The Tv With Your Pc - Samsung PN50B450B1DXZA User Manual

Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system
doesn't equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video.
For the display modes listed below, the screen image has been optimized during manufacturing.
D-Sub and HDIVli/DVl input
one I.{esomt o n PN42B450BiD PN50B450BiD
Frequency (kHz) Frequency (Hz) Frequency (MHz) (H/V}
640x 350 31.469 70.086 25.175 + / - v" v"
IBM
720x 400 31.469 70.087 28.322 -/ + v" v"
640x 480 35.000 66.667 30.240 - / - _/ _/
MAC .....................................................................................................................................................................................................................................
832x 624 49.726 74.551 57.284
- / -
v" v"
31.469 59.940 25.175 - / - V" V"
640x 480 37.861 72.809 31.500 - / - v" v"
37.500 75.000 31.500 - / - V" V"
37.879 60.317 40.000 + / + ,/ ,/
800x 600 48.077 72.188 50.000 + / + v" v"
VESADMT
[
46.875 75.000 49.500 + / + v" v"
48.363 60.004 65.000 - / - ,/ ,/
1024 x768 56.476 70.069 75.000 - / - v" v"
60.023 75.029 78.750 + / + v" v"
1360 x768 47.712 60.015 85.500 + / + v"
720 x 576 35.910 59.950 32.750 - / + v" v"
VESACVT 44.772 59.855 74.500 -/ + v"
1280 x720
56.456 74.777 95.750 -/ + v"
VESAGTF 1280 x720 52.500 70.000 89.040 -/ + v"
When using an HDMI/DVI cable connection, you must use the HDMI IN 2(DVI) terminal.
Setting up the TV with your PC
C)
C)
Auto Adjustment
Use the auto adjustment function to have the TV set automatically adjust the video
signals it receives. The function also automatically fine-tunes the settings and adjusts the
frequency values and positions.
Press the TOOLS b_ttOn t0 display Tools menu.
You can also set the auto adjustment by selecting Tools _. Auto Adjustment
@ Preset: Press the SOURCE button to select PC mode.
@ This function does not work in DVI-Digital mode.
Screen
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the
noise is not removed by fine tuning alone, then make the vertical frequency adjustments
on your PC and fine tune again.
After the noise has been reduced, re-adjust the picture so that it is aligned on the center
of the screen.
@ Preset: Press the SOURCE button to select PC mode.
Coarse
Adjusts the frequency when vertical noise appears on the screen.
Fine
Adjusts the screen to be clearer.
PC Position
Adjust the PC's screen positioning if it does not fit the TV screen. Press the A or T button
to adjusting the Vertical-Position. Press the _1or i.button to adjust the Horizontal-Position.
Image Reset
You can replace all image settings with the factory default values.