Table of Contents
Advertisement
6.3.3
Deleting a RAID set
Take caution when deleting a RAID set. You will lose all data on the hard disk
drives when you delete a RAID set.
To delete a RAID set
From the utility main menu, select 2. Delete RAID Volume and press
1.
<Enter>. The following screen appears.
Intel(R) Matrix Storage Manager option ROM v8.5.0.1030 ICH10R/DO wRAID5
Name
Volume0
[↑↓]-Select
2.
Use the up/down arrow key to select the RAID set you want to delete, and
then press <Del>. The following warning message appears.
3.
Press <Y> to delete the RAID set and return to the utility main menu, or press
<N> to return to the DELETE VOLUME menu.
6-28
Copyright(C) 2003-08 Intel Corporation.
[
Level
RAID0(Stripe)
Deleting a volume will reset the disks to non-RAID.
WARNING:
(This does not apply to Recovery volumes)
[ESC]-Previous Menu
[
DELETE VOLUME VERIFICATION
ALL DATA IN THE VOLUME WILL BE LOST!
(This does not apply to Recovery volumes)
Are you sure you want to delete volume "Volume0"? (Y/N):
DELETE VOLUME MENU
]
Drives
Capacity
2
298.0GB
[
HELP
]
ALL DISK DATA WILL BE DELETED.
]
All Rights Reserved.
Status
Bootable
Normal
Yes
[DEL]-Delete Volume
Chapter 6: RAID configuration
Advertisement
Table of Contents
