Setting The Time Of Day; Time And Temperature Settings; Display Features - Horstmann CentaurStat 7 User Operating Instructions Manual

Press the
SET button
until SET

indicator is
next to clock
position on
the display
When setting the time or altering the temperature settings, if a period exceeding
65 seconds is allowed to elapse between button presses then the CentaurStat will
automatically return to the run position. Any alterations made since the last press of the
ENTER button will not be recognised.
The CentaurStat 7 has
six temperature settings
per 24 hours.
These all have different
start times and temperature
settings. The default
factory settings are shown
opposite. Should you want
to alter these default times
and temperatures, proceed
as per the instructions on
page 5.
The CentaurStat has two user displays, by pressing the PLUS and MINUS buttons
simultaneously, the user can toggle between either Display 1 or Display 2.
Display 1 - Shows current time
and target temperature
4

Setting the Time of Day

Use the
PLUS and

MINUS
buttons
to adjust
the day

Time and Temperature Settings

Period Times
1
2
3
4
5
6

Display Features

Use the
PLUS and
Press

MINUS
ENTER
buttons
to adjust
the time
DEFAULT SETTINGS
Monday - Friday
Temps.
6:00am 20ºC
8:30am 18ºC
11:30am 20ºC
1:30pm 18ºC
5:00pm 21ºC
10:00pm 15ºC
Display 2 - Shows current and
target temperature
Press
 
ENTER
Saturday/Sunday
Period Times
1 7:00am
2 10:00am 18ºC
3 11:30am 21ºC
4 1:30pm
5 5:00pm
6 11:00pm 15ºC
Press the
SET button
until SET
indicator
is returned
to the RUN
position
Temps.
20ºC
18ºC
21ºC