Sony BDV-N8100W Operating Instructions Manual page 30

About the LINK/STANDBY
indicator
The LINK/STANDBY indicator shows
wireless transmission status, as follows.
Indicator Status
Turns green. The system is turned on,
wireless transmission is
activated and surround
signals are being
received.
Turns orange. The system is turned on,
wireless transmission is
activated with the Secure
Link function, and
surround signals are
being received.
Flashes green or Wireless transmission is
orange slowly. deactivated.
Turns red. The surround amplifier is
in standby mode while
the system is in standby
mode or wireless
transmission is
deactivated.
Turns off. The surround amplifier is
turned off.
Flashes green The wireless transceiver
quickly. is not inserted correctly
into the wireless
transceiver slot.
Flashes red. The surround amplifier's
protection is active.
About the standby mode
The surround amplifier enters standby
mode automatically when the main unit is
in standby mode or wireless transmission is
deactivated.
The surround amplifier turns on
automatically when the main unit is turned
on and wireless transmission is activated.
US
30
To specify the wireless
connection
If you use multiple wireless products or
your neighbors use wireless products,
interference may occur. To prevent this,
you can specify the wireless connection to
link the main unit to the surround amplifier
(Secure Link function). For details, see
"Further Settings for the Wireless System"
(page 57).