Data Backup And Initialization; Backup Data Maintained When Power Is Turned Off; Saving The Backup Data To A Usb Flash Memory; Initializing The Settings - Yamaha Modus F02 Owner's Manual

Data Backup and Initialization

Backup Data Maintained When Power is Turned Off

The following settings and data are maintained even if you turn the power off.
• Metronome Volume (page 16)
• Metronome Beat (page 16)
• Keyboard Touch Sensitivity (page 17)
• Tuning (page 20)
• Intelligent Acoustic Control Depth (page 14)
• Intelligent Acoustic Control On/Off (page 14)
• User Song (MIDI) data (page 26)

Saving the Backup Data to a USB Flash Memory

The Backup Data (listed above) can be saved to a USB flash memory as a single Backup file (extension: .bup). Also, the
files saved in a USB flash memory can be loaded into this instrument.
Save
1.
Connect a USB flash memory.
2.
While holding down [REC], press [VARIATION].
The backup data (settings of this instrument and a User Song data in this
instrument) are saved to a USB flash memory and the file is automatically named as
"F02.bup. "
If the USB flash memory contains a file with the same name as the one you are
attempting to backup, the file will be overwritten.
Load
The backup data (the settings of the instrument and a User Song data in this instrument)
saved to a USB flash memory is loaded into this instrument (restored to their original
state). When the operation is complete, the instrument will be restarted automatically.
1.
Connect a USB flash memory.
2.
While holding down [REC], press [SPLIT].

Initializing the Settings

While holding the C7 key (right-most key on the keyboard), press the Power switch to turn the power on. This operation
erases backup data in this instrument and restores the factory default settings. However, the User Song saved to this
instrument is retained.
Data Backup and Initialization
36
F02 Owner's Manual
• Character code (page 29)
• Audio Song Playback Volume (page 25)
• Half Pedal Point (page 15)
• String Resonance Depth (page 19)
• AUX IN Noise Gate On/Off (page 33)
• MIDI Song Playback Channel (page 25)
• MIDI settings (pages 34, 35)
C7
Power switch
NOTE
The "bUP" message appears
on the display during saving
the backup data.
NOTICE
During backup data saving/
loading, do not turn off the
power. If you turn off the
power during these
operations, data will be
lost.
NOTE
The "rSt" message appears on
the display during loading the
backup data.
NOTICE
Do not manually change the
backup file name by using a
computer; doing so will
render the file unloadable.