Changing The Aspect Ratio Of The Projected Image - Epson PowerLite Pro Z8150NL User Manual

Changing the Aspect Ratio of the Projected Image

Changing the Aspect Ratio of the Projected Image
You can select the aspect mode according to the type of input signal, ratio
of height and width, and resolution to switch the Aspect Ratio
projected image. The aspect modes are listed below. The aspect modes
that can be set depend on the type of image that is being projected.
PowerLite Pro Z8350WNL/Z8450WUNL/Z8455WUNL
Aspect mode
Normal Projects to the full projection size while retaining
the aspect ratio of the input image.
Auto Projects in an appropriate aspect ratio based on
information from the signal being input.
16:9 Projects to the full projection size at an aspect
ratio of 16:9.
16:9 (Up) Projects to the full projection size at an aspect
ratio of 16:9 on the top of the screen.
16:9 (Down) Projects to the full projection size at an aspect
ratio of 16:9 on the bottom of the screen.
Full Projects at full size.
Zoom Projects the input image enlarged to the full
lateral direction size as the aspect ratio remains.
Parts that extend beyond the projection size are
not projected.
Native Projects at the resolution of the input image size
to the center of the screen. This is ideal for
projecting clear images.
If the image resolution exceeds the panel
resolution of this projector (PowerLite Pro
Z8350WNL: 1280x800, PowerLite Pro
Z8450WUNL/Z8455WUNL: 1920x1200), the
edges of the image are not projected.
g of the
Explanation
PowerLite Pro Z8150NL/Z8250NL/Z8255NL
Aspect mode
Normal Projects to the full projection size while retaining
the aspect ratio of the input image.
Auto Projects in an appropriate aspect ratio based on
information from the signal being input.
4:3 Projects to the full projection size at an aspect
ratio of 4:3. This is suitable for images at an
aspect ratio of 5:4 (for example 1280x1024) at full
projection size.
16:9 Projects at an aspect ratio of 16:9. This is suitable
for projecting to the full screen size of 16:9.
16:9 (Up) Projects to the full projection size at an aspect
ratio of 16:9 on the top of the screen.
16:9 (Down) Projects to the full projection size at an aspect
ratio of 16:9 on the bottom of the screen.
Native Projects at the resolution of the input image size
to the center of the screen. This is ideal for
projecting clear images.
If the image resolution exceeds the panel
resolution of this projector (1024x768), the
edges of the image are not projected.
27
Explanation