Selecting The Color Bars; Setting The Detail; Adjusting The Shutter Speed - Panasonic AWRP120 Operating Instructions Manual

Making image adjustments for the selected remote camera

Selecting the color bars

Press the BARS button to output color bar signals from the remote
camera .
Button indicator off : Outputs the signal for the images shot by the
camera
Button indicator on : Outputs the color bar signal

Setting the detail

The image detail (image sharpness) can be adjusted .
1 .
Press the DETAIL button .
The current detail setting appears .
D E T A I L :
L E V E L :
2 .
Turn the F1 dial and F2 dial to select settings .
8
O n
F1 dial
L O W F2 dial
(continued)

Adjusting the shutter speed

The shutter mode and shutter speed of a remote camera can be
selected .
1 .
Press the MENU button to turn on its indicator .
2 .
Open SHUTTER menu [21] .
Setting the shutter mode
3 .
Turn the F1 dial to display the "1 . SHUTTER" item .
1.SHUTTER
4 .
Turn the F2 dial to select the shutter mode, and then
press the F2 dial to confirm the selection .
Off : Turns off the electronic shutter .
Step : Operates the shutter at the shutter speed set in the
"2 . SPEED" item .
Synchro : Operates the shutter at the shutter speed set for the
remote camera .
Set the shutter speed value for synchro mode in the OSD
menu of the remote camera .
For details, refer to the Operating Instructions for the
remote camera .
ELC : Controls the electronic shutter and automatically adjusts
the light quantity .
z The shutter mode settings differ depending on the remote camera
connected . Check the Operating Instructions for the corresponding
model .
Setting the shutter speed
When "Step" has been selected as the shutter mode, you can specify
the shutter speed .
5 .
Turn the F1 dial to display the "2 . SPEED" item .
2.SPEED
6 .
Turn the F2 dial to adjust the shutter speed .
z The shutter speed settings differ depending on the remote camera
connected . Check the Operating Instructions for the corresponding
model .
Note
z For a remote camera connected via a serial connection, when
z
you change the camera group once and then return to the original
camera group, the shutter speed is set to "1/100" .
Off
1/100