Front View; Rear View - Hitachi CM640ET User Manual

Install the monitor in the following way, taking care to maintain safety.

FRONT VIEW

Install the monitor on a horizontal base.
2. Power Cord Connection
country in which you are using the monitor.
3. Signal Cable Connection
Insert the Signal Input Connector of the monitor to the host computer, with
attention to it's suitability, and secure the screws on the connector shell firmly.
D-Sub Mini ISpin
4. Power On
Turn on the Power Switch of the monitor first, then the computer.
Refer to Page 10 "POWER ON/OFF".
8
Rear Cover --L7
Signal Input
the
Connector

REAR VIEW

to the host -
of
computer