Table of Contents
Advertisement
OPERATING INSTRUCTIONS (continued)
SETUP MENU
MENU
Selected characters
Selected characters
Auto Adjust*
Auto Adjust*
Horizontal Position
Horizontal Position
Vertical Position
Vertical Position
Horizontal Clock
Horizontal Clock
Clock Phase
Clock Phase
Reset
Reset
Input Level
Input Level
Frequency Display
Frequency Display
WVGA Type
WVGA Type
Vertical Filter
WXGA Mode
Frequency Mode
Vertical Filter
RGB1
Frequency Mode
RGB2
RGB1
RGB2
* Depending on the type of signal displayed, displays may not be optimized through automatic adjustment. Adjust manually to optimize them.
20
Picture
Audio
Timer
Function
Setup
Language
Select
OK Set
(Menu)
(Menu)
Pressing the OK button here,
Pressing the OK button here,
Automatic regulation is started.
Automatic regulation is started.
Moves the horizontal position
Moves the horizontal position
Moves the horizontal position
Moves the horizontal position
to left.
to right.
to left.
to right.
Moves down the vertical
Moves down the vertical
Moves up the vertical position. Adjust the vertical display position.
Moves up the vertical position. Adjust the vertical display position.
position.
position.
Reduces the dot clock
Increases the dot clock
Reduces the dot clock
Increases the dot clock
frequency (shrinks the right
frequency (expands the right
frequency (shrinks the right
frequency (expands the right
side).
side).
side).
side).
Slows the dot clock phase
Advances the dot clock phase
Slows the dot clock phase
Advances the dot clock phase
(shifts slightly to left).
(shifts slightly to right).
(shifts slightly to left).
(shifts slightly to right).
(off the function)
(waiting to reset)
(off the function)
(waiting to reset)
0.7V
0.7V
Off
Off
Off
Off
Off
Off
1280x768
Movie
Off
Movie
Setup
Auto Adjust
Horizontal Position
OK
Vertical Position
Horizontal Clock
Clock Phase
Reset
Select
Return
Setup
Auto Adjust
Horizontal Position
Vertical Position
Horizontal Clock
Clock Phase
Reset
Select
Return
Setup
Input Level
Frequency Display
WVGA Type
WXGA Mode
Vertical Filter
Frequency Mode
RGB1
RGB2
Select
Set
Adjust
Adjust
Horizontal Position, Vertical Position, Horizontal Clock and Clock
Horizontal Position, Vertical Position, Horizontal Clock and Clock
Phase are adjusted automatically.
Phase are adjusted automatically.
Adjust the left-side display position.
Adjust the left-side display position.
(This function is only for RGB2. It's not available (grayed out) for
(This function is only for RGB2. It s not available (grayed out) for
RGB1.)
RGB1.)
(This function is only for RGB2. It's not available (grayed out) for
(This function is only for RGB2. It s not available (grayed out) for
RGB1.)
RGB1.)
Adjust for maximum character clarity.
Adjust for maximum character clarity.
(This function is only for RGB2. It's not available (grayed out) for
(This function is only for RGB2. It s not available (grayed out) for
RGB1.)
RGB1.)
Adjust for clear character visibility.
Adjust for clear character visibility.
(This function is only for RGB2. It's not available (grayed out) for
(This function is only for RGB2. It s not available (grayed out) for
RGB1.)
RGB1.)
The original factory settings for the items of this Menu page can be
The original factory settings for the items of this Menu page can be
restored by pressing the OK button. (This is effective only for RGB2.)
restored by pressing the OK button. (This is effective only for RGB2.)
Normally set to 0.7 V. If white is found to spread across the screen, set
Normally set to 0.7 V. If white is found to spread across the screen, set
1.0V
1.0V
to 1.0 V. (This is effective only for RGB2.)
to 1.0 V. (This is effective only for RGB2. )
Set this to Off if the frequency information of the Input Signal Screen
Set this to Off if the frequency information of the Input Signal Screen
On
On
Display is not required.
Display is not required.
This is only available for W-VGA signal.
This is only available for W-VGA signal.
On
On
When it is set to On, the display area modecan be selected Full or
When it is set to On, the display area modecan be selected Full or
Real.
Real.
On
This is only available for (PC) WXGA signal.
1366x768
Turn On when concerned about screen flicker.
The display area is selected [1280x768] or [1366x768].
PC
Set to Movie when viewing moving images on a personal computer.
On
Turn On when concerned about screen flicker.
Optional (grayed out)
PC
Set to Movie when viewing moving images on a personal computer.
Optional (grayed out)
Optional (grayed out )
Optional (grayed out )
Adjust
0
OK
+ 31
– 20
10
Reset
Exit
Horizontal Position
Next / Prev
Adjust
OK
0
+ 31
– 20
10
Reset
Exit
Clock Phase
Next / Prev
0.7V
Off
Off
Off
On
Movie
DVI-PC
RGB
Return
Setup hint
Setup hint
0
Adjust
Return
10
Adjust
Return
Advertisement
Table of Contents
