Charging Unit Wall Mounting; Figure 3-12 Inserting Screws For Wall Mounting - NEC DTH-4R-2 - CORDLESS Lite II BLAC Owner's Manual

Document Revision 3
7.

Charging Unit Wall Mounting

The charging unit is also designed to be wall mounted. Before mounting the
charging unit, consider the following:
To mount the charging unit:
1.
2.
3 - 10
Plug the AC adapter into a standard 120 Vac wall outlet. Refer to
Figure 3-8 Plugging the AC Adapter into the AC Wall Outlet on page
3-7 .
Do not use an outlet controlled by a wall switch.
Select a location away from electrical cables, pipes, or other items
behind the mounting location that could cause a hazard when
inserting screws into the wall.
Make sure the wall material is capable of supporting the weight of the
charging unit.
Use #10 screws with anchoring devices suitable for the wall material
where the charging unit will be placed.
Insert two mounting screws one inch apart. Allow about 3/16 of an inch
between the wall and screw heads for mounting the telephone.

Figure 3-12 Inserting Screws for Wall Mounting

Plug the AC adapter into the charging unit. Wrap the AC adapter cord
around the strain relief.
NEC Unified Solutions, Inc.
term
Installing the D Cordless II