Initial Settings - Hitachi 32LD8700TU Instructions For Use Manual

Initial Settings

When the TV is turned on for the first time,
IDTV is on first. Because this is the first time
that IDTV has been used, there are no chan-
nels stored in the memory.
When the TV is turned on for the first time,
the menu for the language selection appears
on the screen. The message "Welcome
please select your language!" is written in
all language options sequentially in the menu
on the screen.
By pressing or
language you want to set and press "OK"
button. In the menu "Set Language" is written
next to "OK" item to indicate that "Press OK
button to set the highlighted language op-
tion."
You can get information about the menu us-
age by pressing "
button again to exit the help menu.
After pressing "OK" the first time Installation
Menu will appear on screen. Press
buttons, to select country item you want to
set and press "OK" button.
First time installation
Choose Country
OK Set country and continue installation
After the First Time Installation is set, the fol-
lowing message appears on the screen.
Do you want to start automatic search?
Yes
To start automatic search, select "Yes", to
cancel select "No".
• To select an option "Yes or No", highlight
the item by using
"OK" button.
The IDTV will automatically tune to the VHF
and UHF transmission channels looking for
digital terrestrials. TV broadcasts and dis-
playing the names of channels found. This
process will take about five minutes. To can-
cel searching, you can press "
any time during the process.
buttons highlight the
" button. And press "
or
UK
No
or buttons and press
" button at
Automatic Search
Codec 4:3
Codec 16:9
Searching UHF channels 62. Please wait. This will take a few minutes
Cancel searching
MENU
After Automatic Search process is com-
pleted, the following message asking for ana-
logue channel search appears on the screen.
TV switches to the analogue TV mode.
Do you want to search for
analogue channels?
Yes
"
Language
Country
PLEASE CHECK ANTENNA CABLE
AUTO. PROGRAMMING SYSTEM
Press the BLUE button to cancel APS if you
d o n o t wan t t o d e l e t e yo u r e xi s t i n g
programme list.
To continue APS, first select the language
and country by pressing
press the RED or "OK" button.
UK - I
After initial APS is finalized, a programme
list will appear on the screen. In the
programme list you will see the programme
numbers and names assigned to the
programmes.
- 9 -
No
AUTO PROGRAM
English
UK
OK Cancel
 
/ button and then
APS is running...
055,25 Mhz
Cancel