Table of Contents
Advertisement
OPERATING INSTRUCTIONS (continued)
AUTO
PinP
AUTO button
RGB 1
RGB 2
MENU
MENU button
ID
ID button
Automatic Adjustment of
Screen Position and the Clock
Adjustment of the screen to a position suitable for the
video and the clock adjustment can be performed
automatically by pressing the AUTO button of the remote
control.
CAUTIONS
Perform this adjustment for each input (RGB1 or RGB2) and for
each signal.
* Depending on the signal, satisfactory adjustment may not be
possible in some cases. In such case, adjust by referring to the
Display Menu item.
Independent Operation of
Multiple Monitors (ID No)
Setting the ID No. of the remote control allows separate
control of up to a maximum of seven monitors.
Remote control ID No. 2 (initially ID no. 1) can be set by
pressing the ID SET button for 2 sec. or more while
holding down the ID button. The number will be
incremented (2 6 7 1 2) when this button pressed
continuously.
The remote control ID no. can be checked
by pressing the ID SET button while holding
down the ID button.
SET. ID:1
Monitor ID no.
R/C. ID:1
Remote control ID no.
The ID remote control is operated by pressing the
various buttons while holding down the ID button;
Operation is possible only when the remote control and
monitor ID nos. are the same.
• The remote control can be operated normally by pressing the
various remote control buttons without holding down the ID button.
• Set the monitor using the ID No. of OTHER MENU.
VOL
MUTE
VOL
SIZE
RECALL
VIDEO 1
VIDEO 2
RETURN
SELECT/ADJUST
buttons
ENTER
ENTER button
ID SET
ID SET button
Using the Menu Screen
(On-screen display system)
When the MENU button is pressed, the adjustment menu
screen will be displayed; from there, video adjustment
and setting is possible by using the SELECT button,
ADJUST button and ENTER button.
• Refer to
-
concerning the adjustment items and the
settings.
Example: Selecting the Picture screen
1. Press the MENU button to display the Main Menu
screen.
MENU
2. Press the ENTER button to display the Picture Menu
screen. (Use the
and
other items.)
ENTER
3. Use the
and
SELECT buttons to select the item to
be adjusted and then use the
buttons to adjust (example: COLOR).
• Press the RETURN button to return to the previous screen.
• If there is no operation for a period of one minute, the
Adjustment Menu screen will be closed automatically.
MAIN MENU
PICTURE
SOUND
DISPLAY
FUNCTION
OTHER
SEL. ENT ENT. RTN END
SELECT buttons to select
PICTURE MENU 1/2
OPERATE MODE : NORMAL
CONTRAST
: 127
BRIGHTNESS
:
0
COLOR
:
0
TINT
:
0
ENHANCER
: LOW
FILTER
: OFF
RESET
SEL. ENT ENT. RTN BACK
and
ADJUST
COLOR
0
ADJ
RTN BACK
Hide quick links:
Advertisement
Table of Contents
