Page 1
This monitor is ENERGY STAR® compliant when used with a computer equipped with VESA DPMS. The ENERGY STAR® emblem does not represent EPA endorsement of any product or service. As an ENERGY STAR® Partner, Hitachi,Ltd. has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
Table of Contents Chapter 1 Introduction......................1 1.1 Important Safety Precautions......................1 1.2 Some Dos And Don'ts On The Safe Use Of Equipment..............3 1.3 Important Notices ..........................4 1.4 Product Functions..........................4 1.5 Package Contents ..........................4 1.6 Pull down the base........................... 4 1.7 Set up to LCD-TV ...........................
Overloading—Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock. Entering of objects and liquids—Never insert an object into the product through vents or openings. High voltage flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not spill water or liquid on the product.
12) Unplug this apparatus during lightning storms or when unused for long periods of time. 13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
1.3 Important Notices Please use the product under a normal environment 1. Try to avoid the following circumstances. * Heat or direct sunlight places * Places that are unstable or subject to vibration * Location with large magnetic field * Exposure to rain or moisture 2.
3. Remove the protective label. (See figure 1-4) Figure 1-4 1.8 Viewing Angle Adjustment This product is designed to allow users to have a comfortable viewing angle. The viewing angle can be adjusted from -5°to +25°. (See Figure 1-5). Figure 1-5 When you want to close the base and body to 90°, you need to release a button from 25°.
Chapter 2 Installation 2.1 Product Description 2.1.1 Front view of main body Figure 2-1 Figure 2-2 LED lights Green colour --- Power is ON. Indicator for LED lights Orange --- Monitor is in "Power Saving Mode". Power LED is off --- Power is OFF. IR receiver IR receiver.
2.2 System Installation: Please refer to the example closest to your configuration Please turn off the power of all devices before connection. For audio connection, please use RCA audio (L+R) connector. For video connection, please choose either RCA video connector or s-video connector. Moreover, for connection to monitor alone please omit those connections associated with PC.
Chapter 3 Operation Instruction 3.1 IR Control POWER TEXT Switch between power-on and Turn the Teletext function power-off. ON/OFF MUTE INDEX Turn the sound on/off. Turn page to index page. MODE Select the language and the Turn ON/OFF list mode. sound output VOLUME REVEAL...
Page 10
3.1.1 Teletext Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programs, stock prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
Page selection Press the “INDEX ” button to select the index page. You can select the pages which are colour coded along the bottom line with the same coloured buttons. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three-digit page number with the NUMBER buttons in FASTEXT mode.
Page 12
BALANCE 1.Press "MENU" (on main body) or "►" (on remote control) button. 2.Press " " (on main body) or "↑, ↓" (on remote control) button to select BALANCE. 3.Adjust the speaker balance on Left/Right by pressing " " (on main body) or "←, →" (on remote control) button.
Page 13
SETUP CH. SEARCH Press "MENU" (on main body) or "►" (on remote control) button. Press " " (on main body) or "→" (on remote control) button to select SETUP. Press " " (on main body) or "↑, ↓" (on remote control) button to select CH.
Page 14
RECALL Press “MENU” (on main body) or “►” (on remote control) button. Press “ “ (on main body) or “→” (on remote control) button to select SETUP. Press “ “ (on main body) or “↑, ↓” (on remote control) button to select RECALL. Press “...
Page 15
NICAM 1. Press "MENU" (on main body) or "►" (on remote control) button. 2. Press " " (on main body) or "→" (on remote control) button to select SYSTEM. 3. Press " " (on main body) or "↑, ↓" (on remote control) button to select NICAM.
Page 16
3.2.3 PC OSD function description Icon Function Function Description BRIGHTNESS This function increases or decreases the brightness of the image. This function increases or decreases the difference between the dark and light CONTRAST content. This function shifts the entire display image left or right. H-POSITION This function shifts the entire display image up or down.
Chapter 4 Technical Information 4.1 Specifications LCD Panel Size 17" (43 cm) Display Type Active matrix colour TFT LCD Resolution 1280 x 768 Display Dot 1280 x (RGB) x 768 Display Area (mm) 369.6 x 221.7 (H x V) Display Colour 262K Brightness 400 cd/m...
Sync Input Signal Separate TTL compatible horizontal and vertical synchronization Polarity Positive and negative Supports VESA DDC1 and DDC2B functions Plug & Play External Connection Power Input (AC input) AC socket Video Cable 1.5M with 15-pin D-sub connector Environment Operating Condition: Temperature 5°C to 40°C/41°F to 104°F Relative Humidity...
resolution, the text may look not so sharp, and the Graphics may look not so proportional. Chapter 5 Other Information 5.1 Specifications POWER IN 12VDC 5A VIDEO INPUT Composite /Component video RCA connector S-VIDEO INPUT S-Video 4-pin mini DIN AUDIO INPUT Stereo L+R RCA connectors PHONE IN Phone Jack 3.5...
Page 20
Also, if the signal cable is not connected to LCD monitor at all or properly, the monitor screen will display a message “No Signal ”.
The product has been installed and used only in accordance with the instructions supplied with the product. ii) The product has not been repaired, maintained, or modified by any person other than an Hitachi authorised engineer. iii) The product serial number has not been removed or altered.
Page 23
Fax: +46 (0) 8 562 711 13 Tel: +39 02 38073415 Servizio Clienti Email: csgswe@hitachi-eu.com Fax: +39 02 48786381/2 Email: customerservice.italy@hitachi-eu.com HITACHI EUROPE LTD (Norway) AB HITACHI EUROPE S.A.S Lyon Office STRANDVEIEN 18 B.P. 45, 69671 BRON CEDEX 1366 Lysaker...