Getting Started; Dab Mode - Hitachi KH 322 Instruction Manual

Design dab & fm rds tabletop radio
Table of Contents

Advertisement

Getting Started

Connect the supplied AC/DC adapter to the DC IN socket and then plug the other end to the
mains socket. Turn the ON/VOLUME Knob to power the unit up and extend the aerial found on
the top of the DAB radio.
DC IN socket
Installing Batteries
1. Switch off the radio and unplug it from the mains socket.
2. Remove the battery compartment cover at the bottom of the radio.
3. Insert 4 new D-size batteries, referring to the polarity markings inside the battery
compartment.
Note: Before installing batteries, ensure that the radio is disconnected from the mains
supply. If you are not going to use the radio for an extended period, please remove the
batteries to avoid damage. Never mix old and new batteries.

DAB Mode

1. Then your radio will go into DAB mode, or the last selected
mode (ie: DAB or FM or AUX). If you want DAB mode, touch
8
until DAB Mode appears.
RADIO REAR VIEW

Advertisement

Table of Contents
loading

Table of Contents