Connecting To A Digital Av Receiver; Connecting To A Tv With Scart Jack - Hitachi DVP425UK Instruction Manual

Connections

Connecting to a Digital AV Receiver

Receiver has a PCM, Dolby Digital or
MPEG decoder
A
Select one of the video connections (CVBS VIDEO
IN, or COMPONENT VIDEO IN) depending on the
options available on your TV.
B
Connect the COAXIAL jack of the DVD player to the
corresponding Digital Audio In jack on your Receiver
(cable not supplied).
C
Set the DVD player's Digital Output to PCM or ALL
depending on the capabilities of your Receiver (see
page 17 - 18 {Digital Output}).
Tip:
If the audio format of the Digital Output does not
match the capabilities of your receiver, the receiver
will produce a strong, distorted sound or no sound at
all.
Helpful hint: Before making or changing any connections, make sure that all the devices are
CVBS
Pb
Pr
disconnected from the power outlet.

Connecting to a TV with scart Jack

Using SCART sockets
A
Using a scart cable (not supplied) to connect the DVD
SCART OUT to corresponding Scart inputsocket on
the TV.
CVBS
CVBS
SCART OUT
8