Table of Contents
Advertisement
Installing
CAUTION
Do not install close
to an air-
conditioner intake
or outlet.
Do not install in
locations where
there is excessive
amounts of dust,
oily smoke or
tobacco smoke.
Fire could result.
Do not install in
locations where
there is excessive
vibration or impact.
Injury and damage
could result from
falling.
WARNING
Firmly install
coupling pins, snap
pins and screws in
the prescribed
locations.
Failure to do so could
result in the plasma
display dropping.
Do not loosen or
remove hex head
screws.
This could result in
insecure installation
and dropping.
Do not alter any of
the parts. And do
not use broken
parts.
This could result in
injury due to the
plasma display falling.
- 3 -
Do not install near
sprinklers or
sensors.
This could result in
misoperation or
electrical shock.
Install only on a
horizontal surface.
Avoid sloped
surfaces. Also, do not
install facing upward.
The internal
temperature could
elevate and possibly
result in fire.
Injury or damage could
also result from falling.
Make sure the
plasma display
mount fittings and
angle adjustment
unit are firmly
engaged.
Failure to do so could
cause the plasma
display to fall.
Always use at least
two people to
perform the
installation work.
Injury could result from
dropping heavy
objects.
Advertisement
Table of Contents
