Panasonic CF-W4HWEZZBM Service Manual page 40

6.2.18. Remove the LCD Unit
Preparation : perform the section 6.2.1. to 6.2.4. first.
1. Remove the 2 Screws (M)
Screw(M):DXQT26+D5FNL(N15)
2. Remove the LCD Cable from the Connectors (CN10) and
(CN11) on the Main Board and then remove the LCD Unit.
6.2.19. Remove the Hinge Cover
Preparation : perform the section 6.2.1. to 6.2.4. and 6.2.18.
first.
1. Remove the 2 Screws(U) and the Hinge Cover(L,R).
Screw(U):DRHM0074ZA(N3)
6.2.20. Remove the LCD Unit and the LCD
Rear
Preparation : perform the section 6.2.1. to 6.2.4. and 6.2.18.
to 6.2.19. first.
1. Remove the 2 Screws (Y).
Screw(Y):DRHM0074ZA(N3)
2. The LCD Front Case and the combination parts of LCD
Rear Case are separated.
(Combination parts are 6 the top and bottom places for
each, 4 right and left places for each)
3. Remove the Hinge (L, R).
40