Linksys ProConnect Series User Manual

™
ProConnect Series
USB 4-Port
Hub
Use this guide to install this
Linksys product:
USBHUB04
USB 4-Port Hub
User Guide
COPYRIGHT & TRADEMARKS
Copyright © 1999 Linksys, All Rights Reserved. ProConnect is a
registered trademark of Linksys. Microsoft, Windows, and the
Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks and brand names are the property of their
respective proprietors.
LIMITED WARRANTY
Linksys guarantees that every USB 4-Port Hub is free from physi-
cal defects in material and workmanship under normal use for
One (1) year from the date of purchase. If the product proves
defective during this warranty period, call Linksys Customer
Support in order to obtain a Return Authorization number.
Warranty is for repair or replacement only. Linksys does not issue
refunds. BE SURE TO HAVE YOUR PROOF OF PURCHASE AND
BAR CODE ON HAND WHEN CALLING. RETURN REQUESTS
CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE
AND BAR CODE. When returning a product, mark the Return
Authorization number clearly on the outside of the package and
include your original proof of purchase and bar code.
IN NO EVENT SHALL LINKSYS' LIABILITY EXCEED THE PRICE
PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING
FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING
SOFTWARE, OR ITS DOCUMENTATION. Linksys makes no war-
ranty or representation, expressed, implied, or statutory, with
respect to its products or the contents or use of this documenta-
tion and all accompanying software, and specifically disclaims its
quality, performance, merchantability, or fitness for any particular
purpose. Linksys reserves the right to revise or update its prod-
ucts, software, or documentation without obligation to notify any
individual or entity. Please direct all inquiries to:
Linksys P.O. Box 18558, Irvine, CA 92623.
FCC STATEMENT
This equipment has been tested and found to comply with the lim-
its for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency ener-
gy and, if not installed and used according to the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which is found by turning the equip-
ment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment or device
• Connect the equipment to an outlet other than the receiver's
• Consult a dealer or an experienced radio/TV technician for
assistance
902