Changing A Password; Deleting A Password - Epson Progression 4 Setup Manual

Changing a Password

If you need to change the password,
If you are already running SETUP, go to step 2.
1.
If you are not running SETUP, follow the instructions at the
beginning of this chapter to start the program.
Highlight the
2.
setting is
3. Press [nl You see a prompt to enter your old password.
4.
Type! your old password and press [Mrl.
5.
At the next prompt, type a new password and press [Mwl
6. You see a prompt to re-enter your password. Enter your new
passwordagain.
Be sure to save your settings as you exit SETUP to keep your
new password. See page 2-26 for instructions.

Deleting a Password

If you want to
security, follow these steps:
1. If you are already running SETUP, go to step 2.
If you are not running SETUP, follow the instructions at the
beginning of this chapter to start the program.
2. Highlight the Password security option and press [Enlwl
The current setting is Installed.
2-18 Running the SETUP Program
Password option and
Set.
delete the password and disable password
follow these steps:
press [brl. The current