Table of Contents
Advertisement
Tuning a station manually
1.
Press the yellow key twice, then the
2.
Press
– or
3.
Press P– to place the blue cursor on BAND.
4.
Press
– or
5.
Press P– to move the cursor to MANUAL.
6.
Press
– or
the search will stop.
7.
Repeat step 6 until the VCR channel is found.
8.
Press P– to move the cursor to STORE.
9.
Press
+ to store the station with the selected programme number.
10. Press
to return to picture mode.
Should you wish to enter a name against any programme, follow the instructions given in "Naming Stored Programmes".
Fine tuning
Fine tuning should be used for tuning weak, ghosted or patterned signals.
Use above Manual tuning, after which move the cursor to FINE using the P– key.
1.
Press
– or
2.
When correct press P– then
This procedure can be used for any channel.
Press
to return to picture.
Use this menu to set up and store the quality and volume of sound you prefer.
Press the
red
key to display the AUDIO menu.
1.
Press P– or P+ key to select the adjustment you want to make, Volume, Balance, Treble,
Bass, Mode, Spatial and Headphone volume and balance.
2.
Press
– or
bar graph shows the progress of the adjustment.
Repeat steps 1 and 2 until you have completed all the adjustments you want to make.
3.
Press P– or P+ key to select STORE.
4.
Press
– or
The word STORED will appear on the screen for several seconds to confirm this action.
Mode.
When mode is selected, the
different input signals, and the options displayed depend upon the signal being received by the television, (see page 24).
Spatial
. When Spatial is selected, the
or off. When on, the spatial sound gives the impression of the speakers being further apart from each other.
Press
to return to normal viewing.
Normalise
. This will initially reset sound controls to previously stored user values.
If held for two seconds the sound controls will be set to mid-position.
Volume Lock
. A maximum volume limit can be set on your television.
Position the cursor onto the volume control adjustment. Set the volume to the desired maximum level. Press the MUTE key on the
hand unit for a minimum of 3 seconds. The lock icon appears
is set. Release the MUTE key.
To remove the volume lock, repeat as above until the lock icon disappears.
green
+ to select a programme number (00 is recommended for VCR).
+ to select VHF-L, VHF-H or UHF band.
+ to start search in the direction required. Each time a channel is found
+ until best picture is obtained.
+ .
+ key to change the level of adjustment to your own liking. The white
+ key to store the settings.
– and
– and
key once to obtain Tuning menu.
Audio Menu
+ keys toggle the sound between the options available with
+ keys switch spatial sound on
(coloured white) next to the volume bar graph when the lock
4
AUDIO
MODE
ON
STORE
Select ! "
Adjust # $
Advertisement
Table of Contents
