How To Run Basic Programs - Epson Printer Interface Cartridge for the Apple IIc Operation Manual

printer for you and all you have to know about the printer is how to
turn it on and how to load paper. If you need help with the installation
program for your software, see Appendix E.

How to run BASIC programs . . .

If you want to know just enough about BASIC to run the
demonstration programs in this manual, here's all you need. For
more information, see your Apple IIc manuals.
To prepare a disk for entering running, and saving the pro-
grams in this manual, foIlow these steps:
1. Using your system utilities disk, format a new blank disk.
2. Copy the files PRODOS and BASIC.SYSTEM from the sys-
tem utilities disk to your formatted' disk. (The on-screen in-
structions wiIl tell you what to do,)
3. With your computer
the open-Apple key, the control key, and the reset key at the
time,
same
After the third step, which is known as restarting the com-
puter, you'll see the Applesoft prompt (1), and you can begin
entering programs. Simply type the programs in this manual ex-
actly as you see them. Be sure to include all, spaces and punctua-
tions marks, especially semicolons, Press RETURN at the end of
each line. If you make a typing &stake, retype the whole line;
the corrected line will replace the old one.
When you have typed all the lines, run the program by typing
RUN and pressing RETURN. When you are through with
gram and want to start another, type NEW and press
If you want to save
Saving Programs" in
Owner's Guide.
In Chapter 3 you saw the enlargements of the three LX-90 pitches.
Now you'll learn how to produce them.
20
turned on and the new disk in it,
and
reload programs, see "Loading and
the
programming chapter of your Apple
press
a pro-
RETURN.