,
)
I J
t,
From page 24'62 (A)
Check the cable reel:
1. Turn the ignition switch OFF
2. Disconneit the cable reel 2P connector from the SRS
maln harness,
3. Turn the ignition switch ON {ll}
4. Connect a voltmeter and measure voltage between the
No. 1 terminal of the SRS main harness 18P connector
a n d g r o u n d , a n d b e t w e e n t h e N o 1 3 t e r m i n a l a n d
ground. There should be approx. 0 - 0.5 V'
Are vohtg6 as specifi"dT -
YES
NO
Short to powor in the cabto reel; replace thg cable rool
(see page 24'721.
Short to powet in the SRS main h.rness; replace the SRS
main harness.
24-63