Changing The Routing Method; Viewing The Routes - Honda Accord Navigation Manual

Changing the Routing Method

The system lets you select the way you
want to drive to your destination. Select
the desired method using the CHANGE
METHOD scroll bar back (
forward ( ) buttons.
The following methods are available to
change after you have set a destination:
While on a map screen, press the
MENU button. The Change route by
screen will be displayed. Say or select
Change Routing Method, and the
screen changes to:
NOTE:
• The "Direct Route" is usually the
best choice. If you choose any other
method, it becomes the new default
for all future routing. Make sure to
) or
check the routing method if the
displayed route is not what you
expected to see.
• If the trip is greater than 100 miles,
then "Minimize Freeways" and
"Minimize Toll Roads" may be
grayed out. This is normal.

Viewing the Routes

Touching View Routes allows you to
scroll through and view the various
routes (Direct, Easy, Maximize
Freeways, etc.) to your destination. If
you select View Routes, the display
changes to:
Driving to Your Destination
You can change the method for
calculating the route by using the voice
control system and saying "Next" or
"Previous" or by touching Next or
Prev. The system will display another
calculated route.
NOTE:
• It may take several minutes (the
system displays an hour glass while it
is calculating) to show all route
methods, and it is not unusual for the
different methods to pick the same
route. Voice commands cannot be
used while the system is calculating.
• If the trip is greater than 100 miles,
then "Minimize Freeways" and
"Minimize Toll Roads" may be
grayed out. This is normal.
• Zoom IN/OUT to view route details is
not available on this screen. After you
choose a "route method," you can
then zoom in or out on the map
screen to view your route in details.
Navigation System 45