Building-In - AEG 12710 VIT, 14710 VIT Instruction Booklet

Building-in

Building-in
This appliance has been designed to
be built into the kitchen furniture.
The recess should have the dimen-
sions shown in picture A.
When installing the appli-
ance into the kitchen furni-
ture ensure, if possible, the
hoses are placed in either of
the two recesses on the back
of the appliance. This will
help to prevent the hoses
from becoming kinked or
trapped. Picture AB.
Preparation and assembly of the door
The machine is originally pre-
arranged for the assembly of a door
opening from right to left.
In this case it is sufficient to screw in
the hinges (1) and the counter-mag-
net (6) provided with the appliance,
at the right level (Fig. B).
a) Door
The dimensions of the door should
be:
- width
- thickness
The height (C-Fig. C) depends on the height of the adjacent furniture's base.
56
595-598 mm
16-22 mm
B