AEG LAVAMAT 86800 User Information
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. LAVAMAT 86800
  6. User information

AEG LAVAMAT 86800 User Information

Electrolux owners manual front-load washer 86800
Hide thumbs
Table of Contents

Advertisement

Quick Links

LAVAMAT 86800
Washing Machine
User information

Advertisement

Table of Contents
loading

Related Manuals for AEG LAVAMAT 86800

Summary of Contents for AEG LAVAMAT 86800

  • Page 1 LAVAMAT 86800 Washing Machine User information...
  • Page 2 Dear Customer, Please read this user information carefully and keep it to refer to later. Please pass the user information on to any future owner of the appli- ance. The following symbols are used in the text: Safety instructions Warning! Information that affects your personal safety. Important! Information that prevents damage to the appliance.

  • Page 3: Table Of Contents

    Contents Operating Instructions Safety ............Disposal .
  • Page 4 Child safety device..........25 Cleaning and care .

  • Page 5: Operating Instructions

    Operating Instructions 1 Safety Prior to using the appliance for the first time • Follow the “Installation and connection instructions”. • If the appliance is delivered in the winter months when there are mi- nus temperatures: store the washing machine at room temperature for 24 hours before using for the first time.

  • Page 6: Disposal

    • Switch off the washing machine prior to cleaning it and carrying out maintenance. In addition, remove the power plug from the power point or – if the appliance has been hard-wired – switch off the cut- out in the fuse box or completely remove the fuse. •...

  • Page 7: Description Of The Appliance

    Description of the appliance Detergent drawer Rating plate (behind door) Screw feet (height adjustable) Control panel Display What is shown in the display Information field, shows the current settings COTTONS Cycle end at 95C1000 NýýýýýVýSýFýLýBýaýaýKýT Temperature Spin speed/ Rinse hold Function keys START/PAUSE key Options...

  • Page 8: Programme Overview

    Programme overview Programme ENERGY SAVING COTTONS LINEN/EASY CARES 60°, 50°, 40°, 30°, Cold cycle 40 - 60 MIX DELICATES 40°, 30°, Cold cycle WOOL/ (HANDWASH) 40°, 30°, Cold cycle SILK/ (HANDWASH) SPIN RINSE DRAIN REFRESH EASY IRON 60°, 50°, 40°, 30°, Cold cycle 1) A 10 litre bucket contains approximately 2.5 kg of dry washing (cotton).
  • Page 9 Energy-saving programme at 60 °C for lightly to normally soiled whites/coloureds made of cotton/linen. Energy-saving programme at 95 °C for normally to heavily soiled whites/coloureds made of cotton/linen. General programme for whites/coloureds made of cotton/linen as well as for easy- care mixed fibres and synthetics.

  • Page 10: Prior To Using For The First Time

    Prior to using for the first time Switching on the appliance for the first time - setting the language The display is set to English as standard in the factory. Important! If the display does not show the menu for setting the lan- guage when the appliance is switched on, the appliance has been switched on before.

  • Page 11: Setting The Time

    Setting the time So that the time and the end of the programme are correctly displayed, please check the display and set the current time if necessary. To do this, please see the section “Setup/Clock”. Carrying out a wash programme prior to first use In order to remove any residues from the drum and water container which may have been left during manufacturing, perform the first wash cycle without any washing in the machine.

  • Page 12: Running A Wash Cycle

    Running a wash cycle Opening the door/Loading the washing 1. To open the door: pull the handle on the door. 2. Unfold washing and load it loosely into the machine. Mix large and small items. Attention! Do not get any washing caught between the door and the rubber seal.

  • Page 13: Switching On The Appliance/Selecting A Programme

    Washing powder/tablets for the main wash cycle Conditioner/Wash-care products to preserve the shape of garments/Starch Washing powder/tablets for the main wash cycle If you are using water softener and require the right compartment for detergent for the pre-wash cycle, add the water softener on top of the detergent for the main wash cycle in the left compartment.

  • Page 14: Changing The Temperature

    Changing the temperature Press the TEMP. key repeat- edly until the desired tem- perature is displayed. Changing spin speed/selecting rinse hold Press the RPM key repeated- ly, until the desired spin speed or RINSE HOLD is displayed. • With spin speed “0” the last rinse water is drained off at the end of the cycle, but the washing is not...

  • Page 15: Setting Options

    Setting options Options can be added to a wash cycle that has already been selected. Press the OPTIONS key. The display shows the symbols for the options. PREWASH Pre-washes at about 30 °C before the main wash cycle, which follows automatically. SENSITIVE Enhanced rinse action through an additional rinse cycle togeth- er with decreased drum movement (improved fabric care).

  • Page 16: Prewash, Sensitive, Stain, Night Cycle

    Prewash, Sensitive, Stain, Night Cycle 1. Press the OPTIONS key re- peatedly until the desired symbol flashes, e. g., PREWASH. (With each press of the key, the next symbol flashes – moving from left to right.) 2. Press the OK key. The symbol stops flashing.

  • Page 17: Setting Times

    Setting times Shortened cycles and the delay of the start time can be set for a wash cycle that has already been selected. Press the TIME key. The display shows the symbols for Time Saving and Delay Start. Time Saving: SHORT or VERY SHORT Shortened wash cycle for lightly soiled washing.

  • Page 18: Delay Start

    Delay Start 1. Press the TIME key repeatedly, until the DELAY START symbol 2. Press the OK key. “Start in 0 min” is shown in the display. 3. Press the TIME key repeated- ly, until the display shows the desired period by which you want to delay the start, e.

  • Page 19: Starting A Programme

    Starting a programme 1. Check that the water tap is open. 2. Press the START/PAUSE key. The programme is started or it starts after the time delay set has elapsed. If after pressing the START/PAUSE key the display shows “Door not Closed”, the door has not been shut properly.

  • Page 20: Washing Cycle Complete/Removing The Washing

    Washing cycle complete/Removing the washing At the end of the cycle a long acoustic signal sounds 3 times (when the SOUND setting is NORMAL or LOW) and the messages “Cycle ended” and “Door openable” appear alternately in the display. 1. Open the door and remove the washing. 2.

  • Page 21: Setup

    Setup The special functions that can be set under Setup remain permanently stored independent of each washing cycle – even after the appliance has been switched off or the mains plug has been removed from the socket. Memory 1, 2, 3 Programme combinations can be stored at programme knob positions MEMORY 1, 2, 3 and can then be selected using the programme knob.

  • Page 22: Sound

    7. Press the OK key. The programme combination is now stored to programme knob posi- tion MEMORY 1 and in the future can be selected directly using the programme knob. The Memory can be overwritten at any time with a new programme combination (see “Changing the Memory”), but cannot be deleted.

  • Page 23: Extra Rinse

    Extra Rinse 1. Turn the programme knob to any programme and press the OPTIONS key repeatedly until the SETUP symbol 2. Press the OK key. 3. Press the OPTIONS key re- peatedly until EXTRA RINSE is shown in the display. 4.

  • Page 24: Clock

    Clock 1. Turn the programme knob to any programme and press the OPTIONS key repeatedly until the SETUP symbol 2. Press the OK key. 3. Press the OPTIONS key repeatedly until CLOCK is shown in the display. 4. Press the OK key. 5.

  • Page 25: Child Safety Device

    Child safety device If the child safety device has been activated, the door can no longer be shut. Activating the child safety device: Use a coin to turn the knob (on the inside of the door) in a clockwise di- rection as far as it will go.

  • Page 26: Cleaning And Care

    Cleaning and care Important: Do not use furniture cleaning products or aggressive clean- ing agents to clean the appliance. Wipe over the control panel and housing with a damp cloth. Detergent drawer The detergent drawer should be cleaned regularly. 1. Remove the detergent drawer by pulling firmly. 2.

  • Page 27: What To Do If

    What to do if... Remedying small malfunctions If while the appliance is operating a short acoustic signal sounds 3 times and one of the following messages appears in the display: – “No incoming water/Check tap & Hose”, – “No drain/Check drain hose/filter” or “Pump Blocked”, –...
  • Page 28 Problem The washing machine vi- brates when operating or is not stable. Water is running out from under the washing machine. Display shows: “Excess De- tergent” Display shows: – “No drain/Check drain hose/filter” or – “Pump Blocked” Fabric softener not rinsed compartment for ad- ditives is filled with water.

  • Page 29: If The Wash Result Is Not Satisfactory

    Problem The door cannot be opened when the appliance is switched on. Washing is heavily creased. If the wash result is not satisfactory The washing is grey and there are limescale deposits in the drum • Too little detergent was used. •...

  • Page 30: Carrying Out An Emergency Drain

    Carrying out an emergency drain Warning! Prior to carrying out an emergency drain, switch off the washing machine and remove the power plug from the power point. Warning! The water that comes out of the emergency drain hose may be hot. There is a risk of scalding. Let the water cool before performing an emergency drain! 1.

  • Page 31: Drain Pump

    Drain pump The drain pump is maintenance-free. It is only necessary to open the pump cover if there is a malfunction and water is no longer being pumped out, e.g. if the pump wheel is blocked. Before loading the machine, please always ensure that there are no for- eign bodies present in the pockets or in between the items to be washed.

  • Page 32: Technical Data

    Technical data This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive Height x width x depth Depth when door is open Height adjustability Load (depending on programme)

  • Page 33: Installation And Connection Instructions

    Installation and connection instructions 1 Safety information concerning installa- tion • This washing machine cannot be built-in. • Before using for the first time, check the appliance for damage sus- tained while it was being transported. Do not under any circumstanc- es connect an appliance that is damaged to the mains.

  • Page 34: Installing The Appliance

    Installing the appliance Transporting the appliance Warning: The washing machine is very heavy. There is a risk of injury. Exercise care when lifting the appliance. • Do not lay the washing machine on its front nor on its right side (as seen from the front).

  • Page 35: Where To Install

    Special spanner A and sealing caps B (2 units) and C (1 unit) come with the appliance. 3. Use special spanner A to remove screw D and the compression spring. 4. Use sealing cap C to cap the hole. 5. Use special spanner A to remove the two screws E.

  • Page 36: Making The Appliance Level

    Making the appliance level The four feet of the appliance are pre-adjusted. Large degrees of unevenness can be compensated for by adjusting the four feet of the appliance. Use the special spanner supplied to do this. Important: Do not use pieces of wood, cardboard or such like to level out small degrees of unevenness in the floor.

  • Page 37: Electrical Connection

    Electrical Connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING – THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should these safety measures not be observed. Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate.

  • Page 38: Connecting The Appliance To The Water Supply

    The switch must not break the yellow and green earth cable at any point. This appliance complies with the requirements laid out in the EEC Di- rective 76/899. Voltage 240 V AC: Fuse rating 13amps See rating plate for further information. This appliance meets VDE requirements.

  • Page 39: Water Inlet

    Water inlet A 1.35m long pressure hose is supplied with the appliance. If a longer inlet hose is required, only hoses from the manufacturer are to be used. Service Force stocks hose kits of different lengths. Sealing rings are either inserted in the plastic nuts of the threaded hose fitting or are included as spare parts.

  • Page 40: Water Drainage

    Water Drainage The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic “U-Piece“ supplied. The standpipe should have an internal diameter of approximately 38 mm (see dia- gram) thus ensuring there is an air break between the drain hose and standpipe.
  • Page 41 Pumping heights of over 1 metre The washing machine’s drain pump is able to pump water to a height of 1metre, calculated from the surface on which the appliance is installed. Important! If pumping height is over 1 metre malfunctions and dam- age to the appliance may arise.

  • Page 42: Warranty Conditions

    Warranty conditions Great Britain Standard guarantee conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our discretion repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: •...

  • Page 43: Service And Spare Parts

    Service and Spare Parts If the event of your appliance requiring service, or if you wish to pur- chase spare parts, please contact Service Force by telephoning: 0870 5 929 929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area.
  • Page 44 From the Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.

Table of Contents