Other Features; Saving Ink - Canon FAX-JX300 User Manual

Hide thumbs Also See for FAX-JX300:
Table of Contents

Advertisement

Telecom FaxAbility (New Zealand only)
Telecom N.Z. offers the FaxAbility capability. If you subscribe to this service, your line is assigned
two numbers: one for fax and one for phone. When the fax number is called, the network sends a
specific ringing tone which your fax recognizes and automatically handles as a fax call. If the phone
number is called, a different ringing tone is sent out from the network so that the call is handled as a
voice call. This means that there is no switching delay at the other party's end.
Contact Telecom for connection information.
Setting the Fax for Network Switch
1
Press [Receive Mode/Resolution] to select <NET SWITCH>.
See "Setting the Receive Mode" on page 28.
}
The fax returns to standby mode.
Operation for Network Switch System
The procedures for using the network switch system are almost the same as when using the fax
over a normal telephone line. When you receive calls, however, the fax will respond slightly
differently as described below.
When you hear the telephone call ring pattern:
Pick up the Handset and talk normally. If you hear a slow beep, it means the call is from a fax
machine trying to send a document. Press [Start/Copy] to receive the document. If you do not
pick up the Handset, the fax continues to ring until the other party hangs up. If an answering
machine is connected*, it takes over the call.
* FAX-JX500/JX300 only.
When you hear the fax call ring pattern (double ring):
After the fax rings, it receives the document automatically.

Other Features

Saving Ink

You can enable/disable ink-saving feature by selecting <INK SAVER> when the [Menu] button is
pressed.
Note
By enabling this feature, print quality will be reduced. For highest print quality, disable this feature.
1
Press [Menu].
2
Use [{] or [}] to select <DATA REGSTRATION>, then press [Start/Copy].
3
Use [{] or [}] to select <PRINTER SETTINGS>, then press [Start/Copy].
4
Use [{] or [}] to select <INK SAVER>, then press [Start/Copy].
5
Use [{] or [}] to select <ON> or <OFF>, then press [Start/Copy].
Receiving Faxes
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fax-jx201Fax-jx500Fax jx200

Table of Contents