Using Arp To Configure The Print Server Ip Address - Brother NC-5100h Network User's Manual

Using ARP to Configure the Print
Server IP Address
If you are unable to use the BRAdmin application or the printer's
control panel and your network does not use a DHCP server, you can
also use the ARP command. The ARP command is available on
®
Windows systems that have TCP/IP installed as well as Unix
systems. To use arp enter the following command at the command
prompt:
arp -s ipaddress ethernetaddress
Where ethernetaddress is the Ethernet address (MAC address)
of the print server and ipaddress is the IP address of the print
server. For example:
Windows® Systems
®
Windows Systems require the colon ":" character between each
digit of the Ethernet address.
arp -s 192.189.207.2 00:80:77:31:01:07
TCP/IP CONFIGURATION 10 - 6