Paper Problems - Canon LBP3310 User Manual

Paper Problems

Paper comes out wrinkled.
Cause 1
Remedy
Cause 2
Remedy
Paper curls.
Cause 1
Remedy
Cause 2
8
Remedy
Cause 3
Remedy
Cause 4
Remedy
White dust is attached to the printed transparencies.
Cause
Remedy
8-36

Paper Problems

Paper is not loaded properly in the paper cassette or multi-purpose tray.
Load the paper properly in the paper cassette or multi-purpose tray. (See
"Loading Paper in the Paper Cassette," on p. 3-17, "Loading Paper in the
Multi-purpose Tray," on p. 3-31)
Paper is damp due to being stored under unsuitable conditions.
Replace the paper with new paper in an unopened package. (See "Paper
Requirements," on p. 3-2)
Paper is damp due to being stored under unsuitable conditions.
Replace the paper with new paper in an unopened package. (See "Paper
Requirements," on p. 3-2)
Appropriate paper is not being used.
Replace the paper with that which can be used with this printer. (See "Paper
Requirements," on p. 3-2)
The paper is too thin.
Perform the following procedure in the printer driver.
1.
Display the [Paper Source] sheet.
2.
Set [Paper Type] to [Plain Paper L].
Paper that curls easily is output to the face-down output tray.
Switch to the face-up output slot when printing transparencies, labels, Index
Card, or envelopes which tend to curl. (See "Paper Requirements," on p. 3-2)
If you print transparencies after printing paper other than transparency
continuously, chipped paper may attach to the transparencies when they
are output.
Wipe and remove the chipped paper with a soft cloth.