AEG SANTO 3151 Operating Instructions Manual page 12

Reversing The Door
7. Carefully push refrigerator door
onto upper pivot pin and close.
8. Slide the centre door bearing into
the bottom left of the fridge com-
partment door and fasten to the
housing.
9. Carefully slide the freezer com-
partment door onto the centre
bearing pivot and close.
10. Place the lower door bearing in
the bearing pivot of the freezer
compartment door and fasten.
11. Move the door handles from the
left to the right and cover the
remaining holes with the hole
cover pins attached.
12. Fit the plinth again.
12