14.4
Job Log Function
This function can hold and print up to 22 job logs. Log data can also be printed
immediately from the panel or automatically when the log count has reached the
maximum limit.
The log contents are as follows:
Job submission date and time
Input interface (Centronics, lpd, etc)
Data type (XPL)
Document name (file name)
User name/host name
Number of pages used (color/monochrome)
Number of sides used (color/monochrome)
Size of paper used (color/monochrome)
Result (normal termination, error, etc)
Other (title, total print count, rights, etc)
14.5
Reception Limit (IP Filter Function)
LPD, Port9100, and IPP can permit or prohibit job acceptance to a set IP.
15. UTILITY PRINT
15.1
Printer Setting List
A printer setting list can be printed from the panel. The list is printed on A4 paper in
monochrome by automatic tray selection.
15.2
Panel Setting List
A panel setting list can be printed from the panel. The list is printed on A4 paper in
monochrome by automatic tray selection.
15.3
Font List
A font list can be printed from the panel. The list is printed on A4 paper in monochrome
by automatic tray selection. YMCK color patterns are printed on the list.
15.4
Job Log Print
Job log data can be printed immediately from the panel or automatically. The data is
printed on A4 paper in monochrome by automatic tray selection.
15.5
Color Registration Correction Chart
Two kinds of color registration correction charts can be printed. One is the main scan
correction chart and the other is the subscan correction chart. The user can print the
main scan correction chart but the subscan correction chart is for a customer engineer.
I-16