Programme Interruption; Programme Alteration; Skipping A Programme Stage - Miele W 866 Operating Instructions Manual

^ Press the I-ON/0-OFF button.
^ To continue with the same
programme press the I-ON/0-OFF
button again.
The machine will accept the following
changes after the START button has
been pressed,
– selection of a different temperature,
extra selection or de-selection of the
Water plus option can be carried out
up to 6 minutes after start.
– the spin speed for final spin can be
changed if the programme permits.
After start it is no longer possible to se-
lect a different programme.
If a different programme or 6 minutes
after start another temperature is se-
lected the indicator light
Anti-crease/Finish flashes. This does
not affect the programme sequence.
The indicator light goes out when the
programme selector is set back to the
programme or temperature previously
chosen.
18
To select a different programme pro-
ceed as follows:
^ With the I-ON/0-OFF button switch off
the appliance.
^ Turn the programme selector to Fin-
ish .
^ Switch the machine on with the
I-ON/0-OFF button.
^ Select a new programme.
^ Press the START button.
^ Turn the programme selector to Fin-
ish .
As soon as the programme sequence
light for the stage at which the
programme should continue starts
flashing:
^ Turn the programme selector switch
to the appropriate programme within
4 seconds.
When programme locking has been
activated the programme cannot be
changed nor can a programme
stage be repeated or left out.