Table of Contents
Advertisement
Positioning
It is advisable that your appliance is only installed in a location where the ambient temperature of the room,
o
corresponds with the climate classification that is stated on the rating plate of your appliance. Your appliance
may not function correctly if the ambient temperature falls outside of the following ranges.
Positioning the appliance requires two people in order to avoid injuries or damage to the appliance.
o
Your appliance should not be located in direct sunlight or exposed to continuous heat or extremes of
o
temperature (e.g. next to a radiator or boiler). If this is not feasible, then you should install an insulation
plate between the appliance and the adjacent heat source.
o
You should check whether there is an electrical socket available, which will be accessible after your appliance
is installed.
Place the appliance flatly and firmly on a solid base. The appliance is fitted with adjustable feet at the front,
o
which should be used to level off the appliance.
Anything positioned above the appliance must be at least 15 cm away to allow sufficient cooling of the
o
condenser. You must allow a 5 cm gap to the rear and either side of the appliance.
o
If supplied, you should fit two spacers to the back of the cabinet, at the top of the condenser. This will ensure
that the correct distance is maintained at the rear of the appliance.
If you are placing another cooling appliance next door to this product, then there must be a gap of at least
o
2cm between the appliances. This will help to prevent condensation from forming.
Be sure to leave enough space for the opening of the door, to avoid damage to the appliance or personal
o
injury.
Climate classification
SN
N
ST
T
Appropriate ambient temperature
+10 to +32 degrees centigrade
+16 to +32 degrees centigrade
+16 to +38 degrees centigrade
+16 to +43 degrees centigrade
19
Advertisement
Table of Contents
