Table of Contents
Advertisement
OTHER SETTINGS
I To cancel Power Down Image settings
1.
Use the USB cable to connect the camera to
your computer (page 136).
2.
Change the name of the current power down
image from ENDING.JPG to something else,
or delete the current power down image from
Flash memory.
Specifying the File Name Serial Number
Generation Method
Use the following procedure to specify the method for
generating the serial number used for file names (page 105).
1.
In the REC mode or the PLAY mode, press
[MENU].
2.
Select the "Set Up" tab, select "File No.", and
then press [ ].
3.
Use [ ] and [ ] to change the setting, and
then press [SET].
To do this for a newly saved file:
Store the last file number used and
increment it, regardless of whether
files are deleted or whether the
memory card is replaced with a new
one
Find the highest file number in the
current folder and increment it
121
Select this setting:
Continue
Reset
Advertisement
Table of Contents
