Table of Contents
Advertisement
Figure 8–40
8.3.2.3
Setting Logical Volume Parameters
After the LDs that will be used in the LV have been selected, the LV parameters for the LV must be
selected. LV parameter options that are available are shown in Figure 8–41 and can be accessed at
the bottom of the LV Management Window shown in Figure 8–38.
Figure 8–41
LV Assignment
Choose "Primary Controller" or "Secondary Controller" from the "LV Assignment" menu shown in
Figure 8–42.
Selected Logical Drives
LV Parameter Options
Drive Management
111
Advertisement
Table of Contents
