JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual page 24

Getting Started
During Initial Startup
(continued)
10
Set the display rate of each camera such that
the total display rate of all cameras does not
exceed 80 ips
● The default display rate is set to 8 ips. In other words,
the maximum display capacity of 80 ips will be
exceeded if 11 or more cameras are automatically
detected. In this case, you will need to follow the steps
below to adjust the display rate of each camera.
Note :
● The recording rate may drop if the total display rate of all
cameras exceeds 80 ips.
A
Press the [SKIP] to select the Device Manager
●The device at the top of the list is selected.
B
Use the [2/D] and [10/0/E] buttons to select a device
A
Recording
Settings
B
C
Use the [7/B] button to display the camera
D
Use the [10/0/E] button to select a camera
E
Use the [SKIP] button to select [Settings...], followed
by pressing the [16/ENTER] button
●The [Camera Settings] screen appears.
Speedup Settings
C
D
Live Settings