system set(]D
.J
I
DOLBY PRO LOGIC II EFFECT
This function works only inDolby Pro Logic MUSICmode.
1,
2.
3.
Press the 0[] PL II MODE button to select MUSIC mode.
Press the 0[] PL II EFFECT button.
Press the _1,1_buttons to select the desired effect setting.
• PANORAMA : You can select either 0 or 1.
• C- WIDTH : You can select between 0 and 7.
• DIMENS :You can select between 0 and 6.
i}iii!!!iiiii!}
qliii!{ii {!iiiiiiii!i
C}}i
ASC (Auto Sound Calibration) SETUP
By setting the ASC function just once when you relocate or installthe unit, you can have the unit
automatically recognize the distance between speakers, levels between channels, and frequency
characteristics to create a 5.1 -channel sound field optimized for your environment.
L: FRONT S PEAKER (L)
R: FRONT S PEAKER (R)
C: CENTER SPEAKER
SW:
SUBWOOFER
SL: REAR SPEAKER (L)
SR: REAR SPEAKER (R)
ASC
Microphone
W
ASC SETUP can be made when there is no disc in the unit.
Because the volume level of the tone is fixed during the ASC setup, you cannot adjust the
volume using the volume control buttons.
If the auto sound microphone is disconnected during the ASC setup, the setup will be
cancelled.
When ASC function is activated, the DSP/EQ, DOLBY PRO LOGIC II/R BASS/S.VOL
sound effects will not work.
64
To Verify the AS€
Briefly press the ASC button.
• Distance and levelvalues specified for each channel will appear in the display.