Get Started; Connect Power; Set The Clock - Philips ORD2105C/37 User Manual

3 Get started

Always follow the instructions in this chapter in
sequence.

Connect power

Connect the power adaptor to the AC power
outlet.
» The product is switched to standby
mode with the clock (if set) displayed.
• To select a source or switch the product
back to standby mode, press the knob
repeatedly.
• If no audio input is transferred from the
iPod/iPhone or external device over 15
minutes, the product switches to standby
mode automatically.

Set the clock

Note
•
To manually set the clock, switch the product to
standby mode first.
6 EN
1
In standby mode, press and hold SET
TIME on the back of the product for two
seconds.
» [12H] (12-hour time format) or [24H]
(24-hour time format) begins to blink.
2
Rotate the knob to select a time format,
and then press the knob to confirm.
» The hour digits begin to blink.
3
Rotate the knob to set the hour, and then
press the knob to confirm.
» The minute digits begin to blink.
4
Rotate the knob to set the minute, and
then press the knob to confirm.
» The set clock is displayed.
Tip
•
The product synchronizes its clock with iPod/iPhone
automatically when the iPod/iPhone is docked and
recognized.
2 sec.