System Settings (General); Accessing The System Settings (General) - Sharp MX-2300N System Settings Manual

1

SYSTEM SETTINGS (GENERAL)

This chapter describes the system settings that can be configured by general users of the machine.

Accessing the System Settings (General)

When User Authentication is not Enabled
Make sure that the machine is in the standby state and then press the [SYSTEM SETTINGS] key on the operation
panel.
Operation panel
When the [SYSTEM SETTINGS] key is pressed, the following menu screen appears on the touch panel. Touch the item
in this screen that you wish to configure. For detailed explanations of each of the settings, see the following pages of this
chapter.
System settings screen (factory default state)
• To quit the system settings, touch the [Exit] key in the top right corner of the screen.
• User authentication is initially disabled (factory default setting).
DOCUMENT
FILING
IMAGE SEND
COPY
SYSTEM
JOB STATUS SETTINGS
[SYSTEM SETTINGS] key
System Settings
Total Count Default Settings
Paper Tray
Address Control
Settings
Printer Condition Document Filing
Settings
Setup Items
PRINT
READY
DATA
LINE
DATA
LOGOUT
Admin Password
List Print
(User)
Fax Data
Receive/Forward
USB-Device Check
Control
5
Exit
[Exit] key