Wash Complete/Removing The Washing - AEG OKO-LAVAMAT 60300 Instruction Book

Wash Complete/Removing the Washing

The washing program is finished when the M (ON/OFF) button
indicator lamp extinguishes.
After a Rinse Hold:
After a rinse hold the water must be pumped out first, or the washing
spun:
0 Either press one of the buttons to change the final spin speed/ (the
indicator lamp for the required spin speed illuminates)
or
turn the program selector clockwise to position 6 (SPIN),
(washing is spun in accordance with the program just completed),
or
turn the program selector clockwise to position 8 (PUMP OUT)
(water is pumped out).
Once the Program is Finished:
0 1.Open the door.
2. Remove the washing.
Important! The washing machine still needs to be switched off.
3. Press the M (ON/OFF) button.
4. Close the water tap.
5. Pull out the detergent drawer a little so that it can dry out. Leave the
door ajar so that air can circulate in the washing machine.
Important! If the washing machine is not to be used for a long period:
close the tap and isolate the washing machine from the mains.
Operating instructions
21