Enabling Or Disabling A Pin Code - D-Link DWM-152 User Manual

Section 9 - SIM Management
Enable PIN Code
To prevent unauthorized use of the SIM card a PIN code can be enabled.
Tools > Enable/Disable PIN code > Enabled.
1. Select
2. Enter the correct PIN code to enable.
OK to enable PIN code protection.
3. Click
If a PIN number has been enabled, you will always be asked to enter it before
accessing the D-Link Mobile Connection Manager software.
Disable
If a PIN code is no longer required, you may disable it via the following
steps.
1. Click Tools > Enable/Disable PIN code > Disabled.
2. Enter the correct PIN code.
OK to disable the PIN.
3. Click
Note: The PIN is provided by your network service provider.
Warning: The PIN code must be entered correctly within three tries. Failure
to do so will cause the SIM card to become locked.
D-Link DWM-152 User Manual

Enabling or Disabling a PIN Code


26