Replacing The Dimm Module; Replacing The Hard Disk Drive Module - Acer eMachines eM250 Series Service Manual

Replacing the DIMM Module

1. Insert the DIMM Module in to the DIMM slot.

Replacing the Hard Disk Drive Module

1. Insert the HDD in to the HDD Carrier and secure the Carrier to the HDD by replacing the four screws.
2. Insert the HDD Module into the Lower Cover as
shown.
Chapter 3
2. Press the module down to complete the installation.
3. Slide the HDD Module in the direction of the arrow to
connect the interface.
115