Samsung CLP 300 - Color Laser Printer Service Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Printer
  5. CLP 300 - Color Laser Printer
  6. Service manual

Samsung CLP 300 - Color Laser Printer Service Manual

Clp-300 series
Hide thumbs Also See for CLP 300 - Color Laser Printer:
Table of Contents

Advertisement

Quick Links

See also: Driver Manual , User Manual
XSG
Manual
SERVICE
CLP-300

Advertisement

Table of Contents
loading

Related Manuals for Samsung CLP 300 - Color Laser Printer

Summary of Contents for Samsung CLP 300 - Color Laser Printer

  • Page 1 Manual SERVICE CLP-300...
  • Page 2 ELECTRONICS * This service manual is a property of Samsung Electronics Co., Ltd. Any unauthorized use of Manual can be punished under applicable international and/or domestic law. * This service manual is also provided on the web, the ITSELF system Samsung Electronics Co., Ltd.

  • Page 7: Safety Warning

    High voltages and lasers inside this product are dangerous. This printer should only be serviced by a suitably trained and qualified service engineer. (2) Use only Samsung replacement parts There are no user serviceable parts inside the printer. Do not make any unauthorized changes or additions to the printer, these could cause the printer to malfunction and create electric shock or fire hazards.

  • Page 8: Caution For Safety

    Take care not to cut or damage the power cable or plugs when moving the machine. (9) Use caution during thunder or lightening storms. Samsung recommend that this machine be disconnected from the power source when such weather conditions are expected. Do not touch the machine or the power cord if it is still connected to the wall socket in these weather conditions.

  • Page 9: Handling Precautions

    1.2.4 Assembly / Disassembly Precautions Replace parts carefully, always use Samsung parts. Take care to note the exact location of parts and also cable routing before dismantling any part of the machine. Ensure all parts and cables are replaced correctly.

  • Page 10: Disregarding This Warning May Cause Bodily Injury

    Failure to do so could cause the printer to tip or fall possibly causing personal injury or damaging the printer. (5) Do not install the printer on a sloping or unstable surface. After installation, double check that the printer is stable. Service Manual Samsung Electronics...

  • Page 11: Esd Precautions

    2. Be sure to replace the battery with the same or equivalent type recommended by the manufacturer. 3. Super capacitor or Lithium batteries contain toxic substances and should not be opened, crushed, or burned for disposal. 4. Dispose of used batteries according to the manufacture’s instructions. Service Manual Samsung Electronics...

  • Page 12: Product Specifications

    Product Specifications 2. Product Specifications 2.1 Product Overview Item(s) Pages Printed Part number Remark Initial : pages* Sales : 1,000 pages* Standard Standard Usage Service Manual...

  • Page 13: General Specifications

    Product Specifications 2.2 Specifications Specifications are correct at the time of printing. Product specifications are subject to change without notice. See below for product specifications. 2.2.1 General Specifications Service Manual Samsung Electronics...
  • Page 14 Product Specifications 2.2.2 Controller & S/W ∫ ∞ Service Manual Samsung Electronics...

  • Page 15: Paper Handling

    Product Specifications 2.2.3 Paper Handling Service Manual Samsung Electronics...
  • Page 16 Product Specifications 2.2.4 Consumables Initial : (Sales at ISO 19752 Standard Coverage, Initial : (Sales at ISO 19752 Standard Coverage Std. Service Manual Samsung Electronics...
  • Page 17 Product Specifications 2.2.5 Environment 2.2.6 Options 2.2.7 Accessory INA-ACCESSORY JC99-02015A CBF-POWER CORD 3903-000042 BAG PE 6902-000288 S/W APPLICATION-CD JC46-00257A S/W APPLICATION-CD JC46-00313A MANUAL-(CARD)WARRANTY CARD JC68-00690A JC68-01584A LABEL(P)-BLANK 90*25 Service Manual Samsung Electronics...

  • Page 18: Model Comparison Table

    Product Specifications 2.3 Model Comparison Table Service Manual Samsung Electronics...
  • Page 19 Service Manual...
  • Page 20 Initial 7 / Sales 1,000 ISO 19752 Standard Initial 1, / Sales 2,000 ISO 19752 Standard Service Manual...
  • Page 21 Service Manual...
  • Page 22 Service Manual...
  • Page 23 Service Manual...
  • Page 24 Service Manual...
  • Page 25 Service Manual...
  • Page 26 Service Manual...
  • Page 27 Service Manual...
  • Page 28 Service Manual...
  • Page 29 Service Manual...
  • Page 30 Service Manual...
  • Page 31 Service Manual...
  • Page 32 Service Manual...
  • Page 33 Service Manual...
  • Page 34 Service Manual...
  • Page 35 Service Manual...
  • Page 36 Service Manual...
  • Page 37 Service Manual...
  • Page 38 Item(s) Pages Printed Part number Remark standard ISO 19752 Standard conditions and print Service Manual...
  • Page 39 Service Manual...
  • Page 40 Service Manual...
  • Page 41 Status Monitor Data Flow Service Manual...
  • Page 42 Service Manual...
  • Page 43 Service Manual...
  • Page 44 Service Manual...
  • Page 45 Service Manual...
  • Page 46 Service Manual...

  • Page 47: Disassembly And Reassembly

    5.4.1 Cover Unit page(5-10) 5.4.2 Fuser Ass’y page(5-11) 5.4.3 LSU(Laser Scan Unit) page(5-12) 5.4.4 HVPS(High Voltage Power Supply page(5-12) 5.4.5 Main Board page(5-13) 5.4.6 SMPS(Switching Mode Power Supply) page(5-13) 5.4.7 Drive Ass’y page(5-14) 5.4.8 Transfer Roller page(5-14) Service Manual Samsung Electronics...

  • Page 48: Precautions When Replacing Parts

    5.1.1 Precautions when assembling and disassembling * Use only approved Samsung spare parts. Ensure that part number, product name, any voltage, current or temperature rating are correct. Failure to do so could result in damage to the machine, circuit overload, fire or electric shock.

  • Page 49: Parts For Maintenance And Repair

    Disassembly and Reassembly 5.2 Parts for Maintenance and Repair 5.2.1 Replacement interval for parts with a limited life Item(s) Pages Printed Part number ISO 19752 Standard ISO 19752 Standard Usage conditions and print Service Manual...

  • Page 50: Printer Cleaning

    * Do not touch transfer roller when cleaning inside of machine. If transfer roller gets dirty, printing quality could be low. * Please refer to the User Manual for cleaning instructions. Service Manual Samsung Electronics...

  • Page 51: Information Related To Disassembly And Assembly

    - Do not turn ITB Belt back and forth. If not, waste toner powder would be leaked. - When shutter is working on an outlet of waste toner, be careful that waste toner powder would be leaked Service Manual Samsung Electronics...

  • Page 52: Screws Used In The Printer

    The screws listed in the table below are used in this printer. Please ensure that, when you disassemble the printer, you keep a note of which screw is used for which part and that, when reassembling the printer, the correct screws are used in the appropriate places. Service Manual Samsung Electronics...
  • Page 53 Disassembly and Reassembly Service Manual Samsung Electronics...
  • Page 54 Disassembly and Reassembly Service Manual Samsung Electronics...
  • Page 55 Disassembly and Reassembly Service Manual Samsung Electronics...

  • Page 56: Disassembly Procedure

    1) Pull out the unit toward out side of printer slightly. 4. Unscrew 1 screw on the Right Cover and then 2) Lift up the unit gently. remove the Right Cover after open the Rear Cover. 3) Pull out the unit gently. Service Manual 5-10 Samsung Electronics...

  • Page 57: Fuser Ass'y

    5. Remove the Left Cover. 5.4.2 Fuser Ass’y 1. Unscrew 4 screws on the Fuser after open the Rear 3. Take out the Fuser Ass'y from Printer. Cover. 2. Push the Holder Shaft Fuser as shown in Picture. Service Manual 5-11 Samsung Electronics...

  • Page 58: Hvps(High Voltage Power Supply)

    1. Follow step 1 through step 5 in Cover Unit 2. Unscrew 6 screws and then take out the HVPS. Disassembly except removing Righ Cover Be careful of taking out the HVPS because there are 7 High Voltage Terminal behind HVPS. Service Manual 5-12 Samsung Electronics...

  • Page 59: Main Board

    5.4.6 SMPS(Switching Mode Power Supply) 1. Follow step 1 through step 4 in Cover Unit 3. Unscrew 2 screws and then take out the SMPS after Disassembly plug out all the Harness. 2. Remove the Main Board Service Manual 5-13 Samsung Electronics...

  • Page 60: Drive Ass'y

    4. Unscrew 8 screws and then take out the Drive Ass’y. 2. Remove the Main Board 5.4.8 Transfer Roller 1. Open Rear Cover. 2. Pull back the hook, which holds the Roller, like below picture and remove the Transfer Roller Service Manual 5-14 Samsung Electronics...
  • Page 61 Stop Status Black Only CLP-300 Service Manual...
  • Page 62 Service Manual...
  • Page 63 Service Manual...
  • Page 64 Service Manual...
  • Page 65 Service Manual...
  • Page 66 CAUTION: NOTE: Service Manual...
  • Page 67 Service Manual...
  • Page 68 Service Manual...
  • Page 69 Service Manual...
  • Page 70 Service Manual 6-10...
  • Page 71 Service Manual 6-11...
  • Page 72 Service Manual 6-12...

  • Page 73: How To Use Edc (Engine Diagnostic Control) Mode

    Alignment and Adjustmens 6.6 How to use EDC (Engine Diagnostic Control) Mode 6.6.1 Enterence [ Procedure of EDC Mode operation ] 6.6.2 Keys Discription 6.6.3 EDC Map Service Manual 6-13...
  • Page 74 Service Manual 6-14...
  • Page 75 Service Manual 6-15...
  • Page 76 Service Manual 6-16...
  • Page 77 Service Manual 6-17...
  • Page 78 Service Manual 6-18...
  • Page 79 Service Manual 6-19...
  • Page 80 Power On - No Power LED Panel - Power Module error - Main PBA Indicate Status LED Refer to "Red Lamp ON" Green OK? "6.2.2 LED Function" Print(test pattern) printing Refer to "Solution Quality is of Image Problem" Nomal? Service Manual...
  • Page 81 Service Manual...
  • Page 82 Service Manual...
  • Page 83 Service Manual...
  • Page 84 Service Manual...
  • Page 85 Service Manual...
  • Page 86 Service Manual...
  • Page 87 Service Manual...
  • Page 88 Service Manual...
  • Page 89 Service Manual 7-10...
  • Page 90 NOTE: Refer to the Microsoft Windows 98/Me/NT 4.0/2000/2003/XP User's Guide that came with your PC for further information on Windows error messages. Service Manual 7-11...
  • Page 91 Service Manual 7-12...
  • Page 92 Service Manual 7-13...
  • Page 93 Service Manual 7-14...
  • Page 94 Service Manual 7-15...
  • Page 95 Service Manual 7-16...
  • Page 96 Service Manual 7-17...
  • Page 97 Service Manual 7-18...
  • Page 98 Service Manual 7-19...
  • Page 99 Service Manual 7-20...
  • Page 100 Service Manual...
  • Page 101 Service Manual...
  • Page 102 Service Manual...
  • Page 103 Service Manual...
  • Page 104 Service Manual...
  • Page 105 Service Manual...
  • Page 106 Service Manual...
  • Page 107 Service Manual...
  • Page 108 Service Manual...
  • Page 109 Service Manual...
  • Page 110 Service Manual...
  • Page 111 Service Manual...
  • Page 112 Service Manual...
  • Page 113 Service Manual...
  • Page 114 Parts List Service Parts List (Model code : CLP-300/XSG) SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE Drawer# SEC-Code Description & Specification Location Service 8.1-1 JC97-02330A MEA UNIT-FRAME;CLP-300,SEC,WORLD,-,-,-,- Z4398 8.1-2 JC63-00842A COVER-M-LEFT SIDE;CLP-300,ABS FR,T2.5,23 Z4399 8.1-3 JC63-00847A...
  • Page 115 Parts List SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE Drawer# SEC-Code Description & Specification Location Service 8.5-1 JC61-01450A BRACKET-P-DRIVE MOTOR;CLP-300,SECC,T1.2, 8.5-2 6031-001528 WASHER-PLAIN;POLYMIDE,-,ID6,OD13.5,T0.5, Z4422 8.5-2 6031-001051 WASHER-PLAIN;M4,ID4.1,OD7.0,T0.13,*,POLY 8.5-2 6031-001543 WASHER-PLAIN;POLY,-,ID5.1,OD8,T0.13,-,- 8.5-2 6031-001547 WASHER-PLAIN;POLY,-,ID6.5,OD12,T0.5,-,- 8.5-2 6031-001577 WASHER-PLAIN;POLY,-,ID5.1,OD14,T0.5,BLK,...
  • Page 116 Parts List SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE Drawer# SEC-Code Description & Specification Location Service 8.5-50 6502-000121 CABLE CLAMP;DAMC-101,D7~8,L19,SCP-1,NTR 8.5-51 0205-001003 GREASE-BEARING;NYOGEL788,DAMPING GREASE, 8.5-51 0205-001059 GREASE-BEARING;PETAMO GHV 133,BEIGE,15KG 8.5-51 0205-001144 GREASE-BEARING;SF-112,HANARL,NOISE TAMPI 8.5-51 0205-001080 GREASE-BEARING;NYOGEL 774H,NOISE DAMPING...
  • Page 117 GUIDE-M-INPUT FUSER;CLP-300,PET+GF30%,5V 8.8-15 JC66-01110A LEVER-M-ACTUATOR EXIT;CLP-300,PET+GF30%, 8.8-16 JC61-01476A PLATE-P-GROUND FUSER;CLP-300,SUS 304 CSP 8.8-17 JC70-00518A ELECTRODE-P-AC R;CLP-300,C5210P T0.8,D3. 8.8-18 JC70-00519A ELECTRODE-P-AC L;CLP-300,C5210P T0.8,D3. 8.8-19 JC68-00407A LABEL(R)-HV FUSER;ML-6060,PVC,-,220V,-,, L0006 8.8-20 JC68-01134A LABEL(P)-BLANK(FUSER);ML-1710D3,-,WHITE 8.8-21 JC68-01581A LABEL(P)-CAUTION HOT;COMMON,SAMSUNG,PET, 8.8-22 6107-001246 SPRING-CS;SWP-B,-,PI0.9,D5.6,L16.6,-,-,I 8.8-23 6107-001267 SPRING-CS;SWP-B,-,PI1.0,D5.9,L17,-,-,ID4 Z4482...
  • Page 118 Parts List SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE Drawer# SEC-Code Description & Specification Location Service 8.8-24 JC39-00500A CBF HARNESS-FUSE_LINK1;CLP-300,WIRE HARN Z4483 8.8-25 JC39-00501A CBF HARNESS-FUSE_LINK2;CLP-300,WIRE HARN Z4484 8.8-27 6003-000261 SCREW-TAPTITE;BH,+,B,M3,L6,ZPC(YEL),SWRC 8.8-28 4713-001210 LAMP-HALOGEN;230V,-,850W,-,-,-,8x299.5mm Z4485 8.8-29...
  • Page 119 JG61-70531A SPRING ETC-LOCKER,PLATE;SF6000,STS304WPB S0025 8.11-3 JC64-00222A LOCKER-M-KNOCK UP R;CLP-300,POM (M90-44) Z4492 8.11-4 JC64-00223A LOCKER-M-KNOCK UP L;CLP-300,POM (M90-44) Z4493 8.11-5 JC97-02218A MEA UNIT-PLATE KNOCK_UP;ML-1610,SAMSUNG, K3602 8.11-6 6107-001240 SPRING-CS;SUS304-WPB,GROUND END,PI0.6,D1 D4084 8.11-7 JC70-00516A ADJUST-M-CASSETTE R;CLP-300,ABS HB,T2.5, Z4494 8.11-8 JC70-00517A ADJUST-M-CASSETTE L;CLP-300,ABS HB,T2.5, Z4495 8.11-9...
  • Page 120 MEA UNIT-PICK UP GEAR;CLP-300,SEC,WORLD, #N/A 6601-001384 BEARING-BALL;676ZZ,ID6,OD10,L3,GCr 15 + #N/A 6902-000288 BAG PE;LDPE,T0.05,W250,L450,TRP,8,2- #N/A JC68-01765A LABEL-POP;CLP-300,DSH,YUPO,0.08,360,154, #N/A 0201-001235 ADHESIVE-TS;DEH-390D,RED,400,- #N/A JC99-01896A PAA MAIN-PACKING;CLP-300,SAMSUNG,EXPORT, #N/A JC64-00260C HANDLE-BOTTLE M;CLP-300,ABS,T5.4,-,L43.6 #N/A JC99-01897B PAA WOOD-LABEL(SEE);CLP-300/SEE,EU,GOGH, #N/A JC64-00260D HANDLE-BOTTLE C;CLP-300,ABS,T5.4,-,L43.6 #N/A JC99-01898J INA-ACCESSORY;CLP-300/XSG,SAMSUNG,-,GOGH #N/A 0202-001240 SOLDER-WIRE;HSE-01,-,D3,SN/0.5CU/0.03NI/...
  • Page 121 JC92-01710A PBA SUB-CRUM_Y;CLP-300,SEC,KOREA,CRUM_Y, #N/A JC72-01389A SPONGE-CRUM;CLP-300,PORON,-,T2,W8,L12,-, #N/A JC61-01777A HOLDER-BLADE ITB;CLP-300,PC,-,W10,L17.2, #N/A JC67-00134A TANK-M-TONER BOTTLE BK;CLP-300,ABS HB,-, #N/A JC97-01401A MEA UNIT-TERMINAL:TR;ML-5000A,SAMSUNG,KO #N/A JC97-02638A MEA UNIT-TERMINAL GND;CLP-300,SEC,EXPORT #N/A JC97-02639A MEA UNIT-FU TERMINAL;CLP-300,SEC,EXPORT, #N/A JC97-02640A MEA UNIT-REGIACTUATOR;CLP-300,SEC,EXPORT #N/A JC97-02641A MEA UNIT-EXIT ROLLER;CLP-300,SEC,EXPORT, #N/A JC68-01154A LABEL(R)-POP(A);COMMON,-,PC+HOLOGRAM,T0.
  • Page 122 Parts List SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE Drawer# SEC-Code Description & Specification Location Service #N/A JC02-00055A TONER-YELLOW;CLP-300,SAY-79GZ-K1,YELLOW, #N/A JC39-00483A CBF HARNESS-LSU;CLP-300,WIRE HARNESS,UL1 #N/A JC39-00496A CBF HARNESS-LSU_GND;CLP-300,WIRE HARNESS #N/A JC62-00261A SEAL-SHUTTER A;CLP-300,PE FOAM,-,T10,ID3 #N/A JC63-00895A COVER-INNER BK;CLP-300,ABS,T2.0,R75,-,HB...
  • Page 123 Parts List SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE Drawer# SEC-Code Description & Specification Location Service #N/A 2007-000113 R-CHIP;33ohm,5%,1/10W,TP,1608 #N/A 2007-000123 R-CHIP;1.5Kohm,5%,1/10W,TP,1608 #N/A 2007-000134 R-CHIP;33Kohm,5%,1/10W,TP,1608 #N/A 2007-000239 R-CHIP;1.5Kohm,1%,1/10W,TP,1608 #N/A 2007-000309 R-CHIP;10ohm,5%,1/10W,TP,1608 #N/A 2007-000402 R-CHIP;150ohm,5%,1/10W,TP,1608 #N/A 2007-000475...
  • Page 124 Parts List SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE Drawer# SEC-Code Description & Specification Location Service #N/A JC61-01508A FRAME-M-DEVE YELLOW;CLP-300,ABS+GF20%,GR #N/A JC61-01509A FRAME-M-DEVE MAGENTA;CLP-300,ABS+GF20%,G #N/A JC61-01510A FRAME-M-DEVE CYAN;CLP-300,ABS+GF20%,GR40 #N/A JC61-01511A FRAME-M-DEVE BLACK;CLP-300,ABS+GF20%,GR4 #N/A JC61-01512A HOLDER-M-DEVE YELLOW L;CLP-300,ABS+GF20% #N/A...
  • Page 125 Parts List SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE Drawer# SEC-Code Description & Specification Location Service #N/A JC62-00324A SEAL-WASTE B;CLP-300,POLY-URETHANE(SHL), #N/A JC62-00341A SEAL-WASTE EXIT;CLP-300,PORON LE-20 + PE #N/A JC62-00342A SEAL-SIDE CLN OPC;CLP-300,POLYURETHANE F #N/A JC62-00343A SEAL-SENSOR TOP;CLP-300,EPDM,-,T2.5,W4,L...
  • Page 126 Parts List SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE Drawer# SEC-Code Description & Specification Location Service #N/A JC67-00144A TANK-M-WASTE;CLP-300,ABS(TR557A),T2.0,W1 #N/A JC67-00162A CAP-DUCT;CLP-300,NBR,T0.7,17.8,19.7,-,- #N/A JC67-00191A CAP-DUMMY;CLP-300,ABS,-,-,L31.4,DM GRAY, #N/A JC70-10232A IPR-PLATE SAW;ML-80,SUS304 CSP 1/2H,-,T0 O1099 #N/A JC70-40912A ICT-SHAFT HV LARGE;ML-5000A,SWCH18A,-,¥÷...
  • Page 127 Parts List SA : SERVICE AVAILABLE SNA : SERVICE not AVAILABLE DNA : DELIVERY not AVAILABLE Drawer# SEC-Code Description & Specification Location Service #N/A JC61-01525A GUIDE-M-BUSH IDL ITB L;CLP-300,POM M90-4 #N/A JC61-01545A BRACKET-P-CLEANING OPC;CLP-300,SECC,T1.2 #N/A JC61-01575A BLADE-P-DOCTOR;CLP-300,SUS,NATURAL,223*1 #N/A JC61-01668A COLLAR-M-CLUTCH;CLP-300,POM,ID11.4,OD13. #N/A JC61-01674A BLADE-CLEANING OPC;CLP-300,POLY URETHANE...

  • Page 128: Block Diagram

    Block Diagram 9. Block Diagram Service Manual Samsung Electronics...

  • Page 129: Connection Diagram

    Connection Diagram 10 10 10. Connection Diagram Service Manual 10-1 Samsung Electronics...

  • Page 130: Schematic Diagrams

    HVPS, SMPS, COVER_OPEN Digtal Printing Division Engineer K.C.LEE R&D 5 Drawn by Size TITLE: R&D CHK S.D.AN CLP-300(N)/CLX-3160N(FN) DOC CTRL CHK MFG ENGR CHK Main_V0.11 05.06.03 1/15 INDEX Service Manual 11-1 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 131 Digtal Printing Division Engineer K.C.LEE R&D 5 Drawn by Size TITLE: R&D CHK S.D.AN SD(0:31) DOC CTRL CHK CLP-300(N)/CLX-3160N(FN) MFG ENGR CHK Main_V0.11 SA(0:12) 2/15 CHORUSm(1) Service Manual 11-2 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 132 Digtal Printing Division Engineer K.C.LEE R&D 5 Drawn by Size TITLE: R&D CHK S.D.AN DOC CTRL CHK CLP-300(N)/CLX-3160N(FN) +3.3V DGND MFG ENGR CHK Main_V0.11 3/15 CHORUSm(2) Service Manual 11-3 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 133 Digtal Printing Division Engineer K.C.LEE R&D 5 Drawn by Size TITLE: R&D CHK S.D.AN DOC CTRL CHK CLP-300(N)/CLX-3160N(FN) MFG ENGR CHK Main_V0.11 4/15 Clock & Power On Reset Service Manual 11-4 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 134 DGND Digtal Printing Division Engineer K.C.LEE R&D 5 Drawn by Size TITLE: R&D CHK S.D.AN DOC CTRL CHK CLP-300(N)/CLX-3160N(FN) MFG ENGR CHK Main_V0.11 5/15 Flash Memory Service Manual 11-5 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 135 DGND DGND Digtal Printing Division Engineer K.C.LEE R&D 5 Drawn by Size TITLE: R&D CHK S.D.AN DOC CTRL CHK CLP-300(N)/CLX-3160N(FN) MFG ENGR CHK Main_V0.11 6/15 SDRAM Service Manual 11-6 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 136 AVSS61 61 Size TITLE: R&D CHK S.D.AN OTG242_LQFP64 DOC CTRL CHK CLP-300(N)/CLX-3160N(FN) DGND 0904-001865 DGND DGND MFG ENGR CHK Main_V0.11 7/15 USB Host & Device Controller Service Manual 11-7 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 137 C167 U1F25000-35D16N 10pF R&D 5 Drawn by XO_PCLK Size TITLE: R&D CHK S.D.AN DOC CTRL CHK CLP-300(N)/CLX-3160N(FN) DGND Main_V0.11 MFG ENGR CHK 8/15 Ethernet Physical Layer Service Manual 11-8 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 138 Digtal Printing Division Engineer K.C.LEE K6R1016V1D R&D 5 Drawn by DGND DGND Size TITLE: R&D CHK S.D.AN DOC CTRL CHK CLP-300(N)/CLX-3160N(FN) MFG ENGR CHK Main_V0.11 9/15 Scanner Interface Service Manual 11-9 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 139 Digtal Printing Division Engineer K.C.LEE R&D 5 Drawn by Size TITLE: R&D CHK S.D.AN DOC CTRL CHK CLP-300(N)/CLX-3160N(FN) MFG ENGR CHK Main_V0.11 Hyper Terminal, EEPROM, OPE 10/15 Service Manual 11-10 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 140 CLX-3160FN Only Digtal Printing Division Engineer K.C.LEE R&D 5 Drawn by Size TITLE: R&D CHK S.D.AN DOC CTRL CHK CLP-300(N)/CLX-3160N(FN) MFG ENGR CHK Main_V0.11 11/15 SmartDAA Interface Service Manual 11-11 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 141 DGND 100nF Digtal Printing Division Engineer K.C.LEE R&D 5 Drawn by Size TITLE: R&D CHK S.D.AN DOC CTRL CHK CLP-300(N)/CLX-3160N(FN) DGND Main_V0.11 MFG ENGR CHK 12/15 Service Manual 11-12 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 142 DGND Engineer K.C.LEE Digtal Printing Division R&D 5 Drawn by Size TITLE: R&D CHK S.D.AN DOC CTRL CHK CLP-300(N)/CLX-3160N(FN) MFG ENGR CHK Main_V0.11 DEVE_HOME,SCF,FUSER THER 13/15 Service Manual 11-13 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 143 Engineer K.C.LEE R&D 5 Drawn by DGND Size TITLE: R&D CHK S.D.AN DOC CTRL CHK CLP-300(N)/CLX-3160N(FN) MFG ENGR CHK Main_V0.11 BLDC, CLUTCH, DEVE & ITB JOINT 14/15 Service Manual 11-14 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 144 Digtal Printing Division Engineer K.C.LEE R&D 5 Drawn by Size TITLE: R&D CHK S.D.AN DOC CTRL CHK CLP-300(N)/CLX-3160N(FN) DGND DGND MFG ENGR CHK Main_V0.11 15/15 HVPS, SMPS, COVER_OPEN Service Manual 11-15 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 145 11.2 Panel Schematic Diagram MAIN PANEL Service Manual 11-16 Samsung Electronics This Document can not be used without Samsung’s authorization.

  • Page 146: Deve Inf

    DGN D A2 A2 DGN D TONER_CRUM_CONTACT_Y TONER_CRUM_CONTACT_M TONER_CRUM_CONTACT_C TONER_CRUM_CONTACT_K DGN D DGN D DGN D DGN D DGN D DGN D DGN D DGN D Service Manual 11-17 Samsung Electronics This Document can not be used without Samsung’s authorization.

  • Page 147: Itb Inf

    11.4 ITB INF Schematic Diagram ITB_H O ME FROM_DRAW_CON Service Manual 11-18 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 148 11.5 SMPS-110V Schematic Diagram Service Manual 11-19 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 149 11.6 SMPS-220V Schematic Diagram Service Manual 11-20 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 150 11.7 HVPS (1/5) Schematic Diagram Service Manual 11-21 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 151 HVPS (2/5) Schematic Diagram Service Manual 11-22 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 152 HVPS (3/5) Schematic Diagram Service Manual 11-23 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 153 HVPS (4/5) Schematic Diagram Service Manual 11-24 Samsung Electronics This Document can not be used without Samsung’s authorization.
  • Page 154 HVPS (5/5) Schematic Diagram Service Manual 11-25 Samsung Electronics This Document can not be used without Samsung’s authorization.

  • Page 155: Reference Information

    • Brush • Tweezers Standard : For general home use, small type. • Cotton Swab Standard : For general home use, for medical service. • Software (Driver) installation CD ROM Install Driver CD Network S/W CD Service Manual 12-1 Samsung Electronics...

  • Page 156: Acronyms And Abbreviations

    Enhanced Capability Port Inter Process CommunicationEPP Enhanced parallel Port Engine Control Unit Images Per Minute EEPROM Electronically Erasable Programmable Read Only Memory Image Transfer Belt Electro Magnetic Interference local area network Electro photographic Laser Beam Printer Service Manual 12-2 Samsung Electronics...
  • Page 157 SCF/SCT Second Cassette Feeder/Second Purpose Tray Cassette Tray Network Interface Card SMPS Switching Mode Power Supply Network Printer Card SPGP Samsung Printer Graphic Processor NVRAM Nonvolatile Random Access Memory Samsung Printer Language Organic Photo Conductor SPL-C Samsung Printer Language-Color Printed Board Assembly...

  • Page 158: Select A Location For The Printer

    • Provide the proper environment : - A firm, level surface - Away from the direct airflow of air conditioners, heaters, or ventilators - Free of extreme fluctuations of temperature, sunlight, or humidity - Clean, dry, and free of dust Service Manual 12-4 Samsung Electronics...

  • Page 159: A4 Iso 19752 Standard Pattern

    Reference Information 12.4 A4 ISO 19752 Standard Pattern This test page is reproduced at 70% of the normal A4 size Service Manual 12-5 Samsung Electronics...

This manual is also suitable for:

Clp-300nClp-300xsgClp-300

Table of Contents