Print Media Guidelines; Paper Characteristics; Moisture Content; Grain Direction - Dell 1320c - Color Laser Printer User Manual

back to contents page

Print Media Guidelines

Print media is paper, labels, envelopes, and coated paper among others. Your printer provides high-quality printing on a variety of print media. Selecting the
appropriate print media for your printer helps avoid printing troubles. This section describes selecting print media, caring for print media, and loading the print
media in the tray 1.
Paper
Envelopes
Labels
Storing Print Media
Identifying Print Media Sources and Specifications
Paper
For the best print quality in color, use 75 g/m
xerographic, grain long paper. Before buying large quantities of any print media, Dell recommends trying a sample first.
When loading paper, identify the recommended print side on the paper package, and load the paper accordingly. See
"Loading the Single Sheet Feeder" for detailed loading instructions.

Paper Characteristics

The following paper characteristics affect print quality and reliability. Dell recommends that you follow these guidelines when evaluating new paper stock.
Weight
The tray automatically feeds paper weights from 60 to 216 g/m
2
60 to 216 g/m (16 to 80 lb bond) grain long. Paper lighter than 60 g/m
2
use 75 g/m (20 lb bond) grain long paper.
Curl
Curl is the tendency of print media to curve at its edges. Excessive curl can cause paper feeding problems. Curl usually occurs after the paper passes through
the printer, where it is exposed to high temperatures. Storing paper unwrapped, even in the paper tray, can contribute to paper curling prior to printing and
cause feeding problems regardless of humidity. When printing on curled paper, straighten the paper and then insert it into the single sheet feeder.
Smoothness
The degree of paper smoothness directly affects print quality. If the paper is too rough, the toner does not fuse to the paper properly, resulting in poor print
quality. If the paper is too smooth, it can cause paper feeding problems. Smoothness between 150 and 250 Sheffield points produces the best print quality.

Moisture Content

The amount of moisture in the paper affects both print quality and the ability of the printer to feed the paper properly. Leave the paper in its original
packaging until you are ready to use it. This limits the exposure of the paper to moisture changes that can degrade its performance.

Grain Direction

Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the paper, or grain short, running the
width of the paper. For 60 to 135 g/m
short is preferred.

Fiber Content

2
(20 lb) xerographic, grain long paper. For the best print quality in black and white, use 90 g/m
2
(16 to 60 lb bond) grain long. The single sheet feeder automatically feeds paper weights from
2
(16 to 36 lb bond) paper, grain long fibers are recommended. For papers heavier than 135 g/m
2
(16 lb) may not feed properly, and could cause paper jams. For best performance,
2
(24 lb)
"Loading Print Media in Tray 1" and
2
(36 lb bond), grain