Initializing Recordable Dvd Discs - Pioneer DVR-660H-S - 250GB HDD Multizoned DVR Operating Instructions Manual

Recording
05
6 The recorder will now start finalizing
the disc.
During finalization:
• If the finalization process of a DVD-R/
-RW disc is going to take more than
around four minutes, you can press
ENTER to cancel. Around four minutes
before completion, the option to cancel
disappears.
• You can't cancel the finalization of a
DVD+R/+RW disc.
• How long finalization takes depends on
the type of disc, how much is recorded
on the disc and the number of titles on
the disc. A disc recorded in VR mode can
take up to one hour to finalize. DVD-R/
-RW (Video mode) and DVD+R/+RW
discs can take up to 20 minutes.
Initializing recordable DVD
discs
DVD-R DVD-RW DVD+RW DVD-RAM
DVD-R/-RW discs can be initialized for either
Video mode recording or VR mode
1
recording.
When you first load a blank DVD-RW or
DVD+RW disc, the recorder initializes it for
recording automatically. By default, blank
DVD-RW discs are initialized for VR mode
recording. See DVD-RW Auto Initialize on
page 51 if you want to change the default to
Video mode.
DVD-R discs are ready for Video mode
recordings out of the box; if you want to use
a DVD-R for VR mode recording, you must
initialize it before recording anything on the
disc.
DVD+RW and DVD-RAM discs can also be
initialized in order to erase the contents of
the disc.
Note
1 If a disc was previously finalized on an older DVD recorder, you may not be able to re-initialize and/or initialize it
50
for Video mode recording.
En
Important
• Initializing a DVD-RW, DVD+RW or
DVD-RAM disc will erase everything
recorded on it. Make sure there is
nothing on the disc that you want to
keep!
• You may not be able to re-initialize a
DVD-RW disc in a different format if it
was originally initialized on an older DVD
recorder.
• Once initialized for VR mode recording,
you can't re-initialize a DVD-R back to
Video mode.
HOME
MENU
1 Display the Home Menu.
ENTER
2 Select 'Setup' > 'Disc Setup'.
ENTER
3 Select 'Initialize' > 'Video
Mode', 'VR Mode' or 'Initialize DVD+RW'.
Disc Setup
Basic VR Mode
Initialize Video Mode
Initialize
Finalize Initialize DVD+RW
Optimize HDD
ENTER
4 Select 'Start'.
It takes about 30 seconds to initialize the
disc (except DVD-RAM discs, which can take
up to an hour).
Initializing Disc
Start
Start
Start
2ch
1 min left