Dell GX280DT - GX280 Desktop Computer User Manual page 11

This option locks the
system password
field with the admin
password. When
the field is locked,
Password the option to
disable password
Status
security by pressing
<Ctrl><Enter>
when the computer
starts is no longer
available.
When installed and
enabled, this option
alerts the user,
during the next
computer start-up,
Chassis
that the computer
Intrusion
cover has been
opened. The
settings are On,
On-Silent (default),
and Off.
This option appears
in system setup
only if a chassis
intrusion event
occurred. The
Intrusion
settings are Clear
Status
and Detected
(default). Select
Clear to clear the
chassis intrusion
status
Power Management
Determines what
AC happens when AC
power is restored to
Recovery
the computer.
Sets time and days
of week to
automatically turn
on the computer.
Choices are
Everyday or
Weekdays. The
Auto Power
default setting is
On
Off.
This feature does
not work if you turn
off your computer
using a power strip
or surge protector.
Sets the specific
time to
automatically turn
on the computer.
Time is kept in a 24-
hour format
(hours:minutes).
Change the start-up
time by pressing the
right- or left-arrow
Auto Power
key to increase or
Time
decrease the
numbers, or type
numbers in both the
date and time fields.
Use this setting in
conjunction with the
Auto Power On
setting.
When Low Power
Mode is selected,
remote wakeup
events no longer
power up from
Hibernate or Off
unless an additional
Low Power
NIC card is installed.
Mode
NOTE: This setting
affects only the
integrated network
controller.
This option allows
the system to
power up when a
Network Interface
Controller or