Cisco 7604 Configuration Manual page 445

Configuring MLDv2 Snooping for
IPv6 Multicast Traffic
This chapter describes how to configure Multicast Listener Discovery version 2 (MLDv2) snooping for
IPv6 multicast traffic on the Cisco 7600 series routers. Release 12.2(18)SXE and later releases support
MLDv2 snooping on all versions of the PFC3.
For complete syntax and usage information for the commands used in this chapter, refer to the Cisco
Note •
IOS Master Command List, Release 12.2SX at this URL:
http://www.cisco.com/en/US/docs/ios/mcl/122sxmcl/12_2sx_mcl_book.html
• To constrain IPv4 Multicast traffic, see
Multicast Traffic."
• MLD version 1 is not supported.
This chapter consists of these sections:
• Understanding How MLDv2 Snooping Works, page 29-2
Default MLDv2 Snooping Configuration, page 29-8
•
MLDv2 Snooping Configuration Guidelines and Restrictions, page 29-8
•
MLDv2 Snooping Querier Configuration Guidelines and Restrictions, page 29-8
•
• Enabling the MLDv2 Snooping Querier, page 29-9
Configuring MLDv2 Snooping, page 29-10
•
Tip For additional information (including configuration examples and troubleshooting information), see the
documents listed on this page:
http://www.cisco.com/en/US/products/hw/routers/ps368/tsd_products_support_series_home.html
OL-4266-08
Chapter 30, "Configuring IGMP Snooping for IPv4
Cisco 7600 Series Router Cisco IOS Software Configuration Guide, Release 12.2SX
C H A P T E R
29
29-1