Brother KE-430F Instruction Manual page 60

6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
<Method of use>
When a cycle program has been recorded, the cycle program number is displayed after the program number when a program
number is selected.
Step No.
51
Program parameter
for step 1
2439B
2440B
KE-430F, BE-438F
1. Press the or key (1) to select the cycle program
number that you would like to use.
・ The order of displays is as follows.
Program No.
(1 – 89 (*1) )
key
Program No.
(200 – 999 (*2) )
key
Cycle program No.
(C01 – C30 (*2) )
*1: 1 to 64 for the 438F
*2: Only the numbers which have been recorded are
displayed.
・ The cycle program number is displayed in the
PROGRAM No. display, the step number is displayed in
the TENSION display, and the parameter for that step is
displayed in the menu display (2).
・ When you press the SELECT key, the menu display (2)
and the menu indicator (3) are switched, so that you can
check the program parameters for that step.
2. Carry out sewing while referring to "7. Sewing".
・ The recorded programs are carried out in the order of
the steps, and when the last step is completed, sewing
returns to the first step.
・ If you press the
previous step or skip to the next step respectively. (You
do not need to carry out home position detection again.)
key
key
key
key
or key, you can return to the
2382B 2383B
(Continued on next page)